Royal Enfield Scram 440 Trail Green Front Mudguard / Front Fender – Pine Green Matt – RAH00973/A – Genuine OEM

Royal Enfield Scram 440 Trail Green Front Mudguard – RAH00973/A

Genuine Royal Enfield front mudguard / front fender for the Scram 440 Trail Green. The genuine component label identifies part number RAH00973/A as FRONT MUDGUARD – PINE GREEN MATT. Royal Enfield markets the corresponding Scram 440 motorcycle colour as Trail Green; “Pine Green Matt” is the component-level paint/finish description printed on the genuine spare-part packaging.

This is the complete painted front mudguard body shown over the front wheel. It is intended as a direct replacement when the original fender is cracked, deeply scratched, distorted, damaged in an accident, or being replaced during a factory-spec body restoration.

Product Identification

Trail Green vs Pine Green Matt – Why Two Colour Names?

The motorcycle is sold by Royal Enfield in the Trail Green colourway. The genuine replacement mudguard itself is labelled Pine Green Matt. This difference is important when searching for the spare part: a buyer may search for “Scram 440 Trail Green front mudguard”, while the genuine Royal Enfield box/part label may say “Pine Green Matt”.

Both names are therefore included in this listing for accurate customer identification, but the ordering reference remains the complete OEM part number RAH00973/A.

Verified / Supported Compatibility

What This Part Is

• Genuine Royal Enfield replacement front mudguard/front fender.
• Painted in the factory-specified Pine Green Matt component finish.
• Correctly searchable for the Scram 440 Trail Green colourway.
• Full-length low front-fender body with the factory-style central raised section and mounting points.
• A direct body-replacement component when the motorcycle's EPC/VIN calls for RAH00973/A.

What This Part Is Not

• Not a universal 19-inch-wheel motorcycle mudguard.
• Not a rear mudguard.
• Not the Himalayan 411 Pine Green upper/top mudguard.
• Not a front-mudguard extension or separate mudflap.
• Not supplied as a complete front-end kit.
• Not supplied with wheel, fork brace, bolts, washers, clips or other loose mounting hardware unless explicitly stated.

Colour-Specific Body Part – Check Before Fitting

Painted body parts should be verified before installation. Compare the received mudguard with the motorcycle's existing Trail Green/Pine Green Matt finish in natural light. Production batches, ageing, UV exposure, previous paintwork, polishing and surface contamination can make an older motorcycle appear slightly different from a newly manufactured genuine panel.

Do not drill, repaint, sand, polish aggressively or permanently fit the part until the part number, colour, shape and mounting points have been checked.

Current Genuine-Pack Information

Royal Enfield may revise packaging, MRP, batch information or manufacturing date on later stock. The permanent ordering reference is the exact part number and verified application.

When Should the Front Mudguard Be Replaced?

• Cracked or broken after an accident or front-wheel impact.
• Mounting area is damaged or distorted.
• Deep scratches or paint damage make refinishing uneconomical.
• Original mudguard is missing during a restoration or rebuild.
• An incorrect-colour or aftermarket fender is being returned to genuine factory specification.

What You Receive

1 × Genuine Royal Enfield Front Mudguard – RAH00973/A – Pine Green Matt

Not included unless separately ordered: front mudflap/extension, fork brace, mounting bolts, washers, clips, wheel, tyre, fork components, number-plate hardware, decals or any other surrounding part.

Before Ordering

1. Confirm the motorcycle is a Royal Enfield Scram 440.
2. Confirm the required motorcycle colourway is Trail Green.
3. Match the complete part number RAH00973/A, including the /A suffix.
4. Confirm that the required component finish is Pine Green Matt.
5. Compare the existing mudguard shape and all mounting points.
6. If the motorcycle has been repainted, repaired, modified or has a different production configuration, verify the part using the VIN-based Royal Enfield EPC before purchase.

Installation Guidance

• Professional installation is recommended for painted body parts and accident-repair work.
• Inspect all reused bolts, washers, clips, rubber pieces and associated brackets before reassembly.
• Align every mounting point before tightening any fastener fully.
• Never force misaligned holes or drill the genuine mudguard simply to compensate for bent surrounding hardware.
• After installation, verify safe tyre clearance through steering and suspension movement.
• If the old mudguard was damaged in an impact, check the fork, wheel, axle, brace and mounting points for distortion before installing the replacement.

Frequently Asked Questions

Q1. What is Royal Enfield part RAH00973/A?
It is a genuine Royal Enfield front mudguard/front fender labelled Front Mudguard – Pine Green Matt.

Q2. Which motorcycle is this for?
It is listed here for the Royal Enfield Scram 440 Trail Green application. Match the exact part number before purchase.

Q3. Why does the box say Pine Green Matt when the motorcycle colour is Trail Green?
Trail Green is the motorcycle colourway name, while Pine Green Matt is the component finish printed on the genuine replacement-part label.

Q4. Is this the front or rear mudguard?
Front. It is also commonly called the front fender or front wheel mudguard.

Q5. Is the finish gloss or matt?
Matt. The genuine label specifically identifies the finish as Pine Green Matt.

Q6. Does it fit the Scram 440 Trail Blue?
Do not order RAH00973/A when a colour-correct Trail Blue mudguard is required. Royal Enfield uses colour-specific body-part numbers.

Q7. Does it fit Force Blue, Force Grey or Force Teal Scram 440?
This listing does not recommend it as a colour-correct replacement for those variants. Order the appropriate finish-specific part number.

Q8. Does it fit the old Scram 411?
Scram 411 interchangeability is not assumed. Order for a Scram 411 only if its VIN-specific Royal Enfield parts catalogue confirms RAH00973/A.

Q9. Is this the Pine Green Himalayan 411 front mudguard?
No. The older Himalayan 411 Pine Green uses a different mudguard family; the Pine Green top mudguard is documented under the RAH00451 family.

Q10. Does it fit Himalayan 450 or Himalayan 440?
No fitment is claimed. Those are different motorcycle platforms with different front-body assemblies.

Q11. Are mounting bolts included?
No loose bolts or other mounting hardware are claimed as included. This listing is for the mudguard itself.

Q12. Is a mudflap included?
A separate mudflap/extension is not claimed as included. Order any required surrounding part separately by its own OEM number.

Q13. How many pieces are supplied?
One complete front mudguard.

Q14. What is the MRP?
The current genuine pack shown for this batch carries an MRP of ₹1,548 inclusive of taxes. Future Royal Enfield batches may carry a revised MRP.

Q15. What is the manufacturing date of the current batch?
The current photographed genuine pack is marked 09/2026. Manufacturing date can vary as new stock arrives.

Q16. Can I repaint it another colour?
The supplied part is a factory-finished Pine Green Matt body component. Any repainting or modification should be treated as a custom alteration and should only be done after fitment is fully confirmed.

Q17. Should I check the colour before installing?
Yes. Painted parts should be compared before fitting because ageing, previous repair and batch variation can influence the visual match.

Q18. Is RAH00973 without /A enough to identify the part?
Use the full current part number RAH00973/A for ordering. The base number can help with search, but the suffix should not be dropped when matching stock.

Buyer Search Terms

Royal Enfield RAH00973/A, RAH00973A, RAH00973, Scram 440 Trail Green front mudguard, Scram 440 green front fender, Scram 440 Pine Green Matt mudguard, Royal Enfield Scram 440 front fender, Scram 440 front wheel mudguard, Scram 440 front tyre fender, Trail Green Scram 440 body parts, genuine Royal Enfield Scram 440 spares, Pine Green front mudguard Royal Enfield.

Order & Return Check

Please confirm the exact part number, motorcycle model, colour, finish and mounting configuration before installation. Painted body parts should be inspected before fitting, drilling, sanding, polishing or repainting. Correctly supplied parts may not be eligible for return after fitment or alteration. Wrong, damaged or missing-item claims should be supported with an uninterrupted unboxing video and reported within the applicable claim period.