Genuine Royal Enfield Shotgun 650 Left-Hand Rider Foot Control Plate Assembly – KAE00016/A

Genuine Royal Enfield left-hand rider foot-control plate assembly for compatible Shotgun 650 motorcycles. Part number KAE00016/A is the structural mounting/control plate on the rider's left, gear-shift side. It supports the relevant rider-foot-control components but is not the footrest, gear pedal, linkage or a complete mid-control conversion kit.

What It Is

• Genuine Royal Enfield LH control plate assembly
• Exact manufacturer part number: KAE00016/A
• Shotgun 650 rider's left-side / gear-shift-side foot-control mounting plate
• One left-hand plate assembly per motorcycle application
• Replacement chassis/foot-control component for a correctly matched motorcycle

What It Is Not

• Not the left rider footrest or rubber
• Not the gear-change pedal, knuckle or linkage rod
• Not the right-hand brake-side control plate
• Not a complete forward-to-mid-control conversion kit
• Not supplied as a universal custom bracket
• Not confirmed for Super Meteor 650, Classic 650, Bullet 650, Interceptor 650 or Continental GT 650 by this listing

Product Highlights

• Motorcycle named clearly: Royal Enfield Shotgun 650
• Correct side: LH means the rider's left / gear-shift side
• Exact SKU: KAE00016/A, including the /A suffix
• Correct part identity: control plate assembly, not the separate footrest or gear pedal
• Fitment protection: VIN, mounting-hole, linkage and finish checks included
• Ordering clarity: adjacent left/right foot-control references compared below

Verified Specifications

Confirmed Fitment

Royal Enfield may use visually similar components across 650 models. Similar appearance or engine platform does not establish interchangeability.

Check Before Ordering

Fitment Exclusions and Cautions

Related Foot-Control Parts Comparison

Purpose

The control plate provides the designed mounting geometry for the rider's left foot-control system. Correct geometry is important for footrest position, gear-pedal alignment, linkage travel and safe clearance. A bent, cracked, worn or incorrectly fitted plate can cause poor control alignment and must be assessed with its fasteners and attached parts.

Box Contents

• 1 × Genuine Royal Enfield LH control plate assembly, KAE00016/A

Not included unless physically packed: rider footrest, rubber, gear pedal, knuckle, linkage rod, pivot pin, circlips, bushes, mounting bolts, washers, spacers, side stand parts, right-hand plate, conversion hardware or labour.

Installation Guidance

1. Confirm the VIN and exact KAE00016/A requirement before opening or fitting.
2. Support the motorcycle securely on a level surface.
3. Photograph the original routing, spacer order, linkage adjustment and fastener positions.
4. Inspect the frame mounting points and all related control parts for impact damage or distortion.
5. Transfer only serviceable components and replace worn pins, clips, bushes or locking hardware as specified.
6. Install fasteners in the correct locations and tighten to Royal Enfield workshop-manual torque values.
7. Set gear linkage and pedal position to the model-specific specification.
8. Confirm smooth full gear-pedal travel, positive return and clearance throughout suspension and stand movement.
9. Perform a stationary function check followed by a controlled low-speed road test.

Foot controls are safety-relevant. Professional installation is recommended, especially after accident or impact damage.

Care and Diagnostic Guidance

• Do not straighten, weld, drill or grind the plate as a routine repair.
• Investigate difficult shifting before replacing parts; linkage adjustment, bent controls, worn joints or internal gearbox issues may be responsible.
• After installation, recheck fastener security and control movement at the service interval.
• Keep pivot points clean and lubricate only where the workshop manual specifies.
• Replace damaged retaining clips and locking fasteners rather than reusing compromised hardware.

Return-Prevention Checklist

• My motorcycle is a Shotgun 650 and the VIN catalogue calls for KAE00016/A.
• I need the rider's left / gear-shift-side control plate.
• I am not ordering the separate footrest, gear pedal, knuckle or linkage.
• I compared mounting holes, bosses, control geometry and finish with the original.
• I checked all additional hardware and damaged related parts before ordering.
• I will not fit, scratch, modify, drill or mark the part before final verification.
• I will record one uninterrupted unboxing video from the sealed parcel through complete inspection.

Correctly supplied items are not returnable. Replacement is available only for a wrong or transit-damaged item, subject to one uninterrupted unboxing video and notification within 24 hours of delivery. Installed, scratched, marked, modified, incomplete or damaged-after-delivery parts cannot be returned.

Why Buy from Under The Hood?

• Exact Shotgun 650 motorcycle name and component side in the title
• KAE00016/A identity separated from the footrest, pedal and linkage
• Conservative model claims designed to prevent wrong-platform orders
• VIN and physical-comparison checks included before purchase
• Related left/right references explained clearly
• GST invoice where applicable and Royal Enfield parts support

Buyer Search Terms

Royal Enfield KAE00016/A, KAE00016A, Shotgun 650 left foot control plate, Shotgun 650 LH control plate assembly, Royal Enfield Shotgun gear side footrest bracket, Shotgun 650 rider foot control mount, genuine Royal Enfield foot control parts.

Frequently Asked Questions

1. What is KAE00016/A?

It is the genuine Royal Enfield left-hand rider foot-control plate assembly.

2. Which motorcycle is confirmed?

The confirmed application in this listing is the Royal Enfield Shotgun 650, subject to VIN verification.

3. What does LH mean?

LH means the rider's left side when seated on the motorcycle—the gear-shift side.

4. Is this the left footrest?

No. The rider footrest is a separate component that mounts within the foot-control assembly.

5. Is the gear pedal included?

No gear pedal inclusion is promised; treat the pedal, knuckle and linkage as separate parts.

6. Is this the right-hand control plate?

No. KAE00015/A is the related RH control-plate reference; this listing is KAE00016/A LH.

7. Does it fit Super Meteor 650?

No direct stock-replacement claim is made. A conversion must use a complete VIN- and model-verified parts list.

8. Does it fit Classic 650 or Bullet 650?

No fitment is claimed without exact Royal Enfield catalogue confirmation for the VIN.

9. Does it fit Interceptor 650 or Continental GT 650?

No. Their foot-control mounting arrangements may differ and this listing does not confirm compatibility.

10. Are mounting bolts included?

Only the plate assembly is promised. Bolts, spacers, clips and other hardware are separate unless physically packed.

11. Is KAE00008/A the same part?

Do not assume so. It is a different control-plate reference and interchange must be confirmed officially.

12. How do I confirm the correct side?

Compare the old part on the rider's left gear-shift side, including holes, bosses and control attachment points.

13. Can I use it for a custom conversion?

It is not a complete conversion kit. Every associated part, geometry and clearance must be engineered and verified.

14. Can a bent plate be straightened?

Do not straighten, heat or weld it without an approved repair procedure; replacement is the safer approach.

15. Why must the gear linkage be checked?

Incorrect alignment or adjustment can restrict pedal travel, cause poor shifting or prevent positive pedal return.

16. Is professional installation recommended?

Yes, particularly if the original part was damaged in an impact or other controls are misaligned.

17. What torque should be used?

Use the fastener-specific torque values in the correct Shotgun 650 workshop manual; do not guess.

18. What must be tested after fitting?

Check fastener security, footrest stability, smooth pedal movement, positive return, gear selection and all clearances.

19. Can an installed or scratched plate be returned?

No. Installed, marked, scratched, modified or incomplete correctly supplied parts are not returnable.

20. How do I avoid ordering the wrong part?

Match the VIN catalogue, KAE00016/A suffix, Shotgun 650 model, LH side, mounting pattern, control geometry and finish.