Genuine Royal Enfield Shotgun 650 Right-Hand Rider Footrest Assembly – KAE00017/A

Genuine Royal Enfield right-hand rider footrest assembly for compatible Shotgun 650 motorcycles. Part number KAE00017/A is the rider's front footrest on the motorcycle's right, brake-pedal side. It provides the designed support point for the rider's right foot and must not be confused with the pillion footrest, left rider footrest or the separate right-hand control plate.

What It Is

• Genuine Royal Enfield rider footrest assembly
• Exact manufacturer part number: KAE00017/A
• Right-hand / brake-pedal-side rider footrest
• Confirmed Shotgun 650 application
• Front rider position, not rear pillion position
• One RH rider footrest assembly required per applicable motorcycle

What It Is Not

• Not the left-hand rider footrest KAE00018/A
• Not a pillion/passenger footrest
• Not the RH control plate or mounting bracket
• Not the brake pedal, master cylinder or linkage
• Not a pair of footrests
• Not a complete foot-control conversion kit
• Not confirmed for Super Meteor 650, Classic 650, Bullet 650, Interceptor 650 or Continental GT 650 by this listing

Product Highlights

• Bike named clearly: Royal Enfield Shotgun 650
• Correct position: rider/front footrest, not pillion/rear
• Correct side: RH means the rider's right / brake-pedal side
• Exact SKU: KAE00017/A, including the /A suffix
• Pack quantity: one right-hand footrest assembly
• Buyer safeguards: VIN, side, pivot, mounting and included-parts checks

Verified Specifications

Confirmed Fitment

Do not select a footrest solely because another Royal Enfield uses the same 650 engine. Chassis mounting, control-plate design, pivot dimensions, spring arrangement and finish can differ.

Check Before Ordering

Fitment Exclusions and Cautions

Related Foot-Control Parts Comparison

Purpose and Replacement Guidance

The rider footrest supports the rider's foot during normal riding, braking, mounting and manoeuvring. Replacement may be required after bending, cracking, impact damage, excessive pivot wear, damaged stop faces or loss of secure movement. Inspect the control plate, pivot pin, spring, circlip and brake-pedal clearance at the same time; replacing the footrest alone will not correct a damaged mounting plate or worn hardware.

Box Contents

• 1 × Genuine Royal Enfield RH rider footrest assembly, KAE00017/A

Not included unless physically packed with the supplied assembly: LH footrest, RH control plate, brake pedal, pivot pin, spring, circlip, bush, washer, feeler peg, mounting bolts, pillion footrest, conversion parts or installation labour. The manufacturer may supply an assembly with captive subcomponents; verify the received pack before dismantling the motorcycle.

Installation Guidance

1. Confirm the VIN, part number, rider position and RH side before opening or fitting.
2. Secure the motorcycle upright on a stable surface.
3. Photograph the original pivot pin, spring orientation, washers, circlip and stop position.
4. Inspect the RH control plate for cracks, distortion or an elongated pivot bore.
5. Replace worn, bent or damaged pivot hardware instead of transferring it blindly.
6. Fit the footrest and spring in the exact original orientation using approved hardware.
7. Use specified locking devices and workshop-manual torque values where applicable.
8. Verify free movement, correct spring return and positive stop engagement.
9. Confirm clearance from the brake pedal, exhaust and surrounding components.
10. Perform a stationary load/function check and controlled low-speed riding check before normal use.

Professional installation is recommended after impact damage or whenever the mounting plate or related controls may be distorted.

Care and Diagnostic Guidance

• Do not heat, weld, drill, grind or straighten a damaged footrest for routine reuse.
• Keep the pivot area clean; lubricate only where and with what the workshop manual specifies.
• Check spring action and retaining hardware during regular service.
• Investigate looseness promptly because continued movement can damage the control-plate pivot bore.
• Replace distorted hardware and damaged clips rather than relying on temporary repairs.
• After installation, confirm that the brake pedal remains fully accessible and returns correctly.

Return-Prevention Checklist

• My motorcycle is a Shotgun 650 and its VIN catalogue calls for KAE00017/A.
• I need the rider/front footrest, not a pillion/rear footrest.
• I need the rider's right/brake-pedal side, not the left/gear-shift side.
• I understand this is one RH assembly, not a pair.
• I compared the pivot, stop shape, width, bore, finish and mounting arrangement.
• I checked whether the pin, spring, circlip, bush and feeler peg must be ordered separately.
• I will not install, scratch, modify or mark the part before completing all checks.
• I will record one uninterrupted unboxing video from sealed parcel through complete inspection.

Correctly supplied items are not returnable. Replacement is available only for a wrong or transit-damaged item, subject to one uninterrupted unboxing video and notification within 24 hours of delivery. Installed, scratched, marked, modified, incomplete or damaged-after-delivery parts cannot be returned.

Why Buy from Under The Hood?

• Shotgun 650 motorcycle name, RH side and rider position stated in the title
• KAE00017/A separated clearly from the LH and pillion footrests
• Pack quantity and likely separate hardware explained before purchase
• VIN and physical-comparison checks designed to reduce incorrect orders
• Conservative compatibility claims instead of guessing across 650 models
• GST invoice where applicable and Royal Enfield spare-parts support

Buyer Search Terms

Royal Enfield KAE00017/A, KAE00017A, Shotgun 650 right rider footrest, Shotgun 650 RH foot peg, Shotgun 650 brake side footrest, Royal Enfield Shotgun front right footrest assembly, genuine Shotgun 650 rider foot peg, Shotgun 650 OEM footrest.

Frequently Asked Questions

1. What is KAE00017/A?

It is a genuine Royal Enfield right-hand rider footrest assembly.

2. Which motorcycle is confirmed?

The confirmed application in this listing is the Royal Enfield Shotgun 650, subject to VIN verification.

3. What does RH mean?

RH means the rider's right side when seated on the motorcycle—the rear-brake-pedal side.

4. Is this a rider or pillion footrest?

It is the front rider footrest, not the rear passenger/pillion footrest.

5. Is this sold as a pair?

No. The sale quantity is one right-hand rider footrest assembly.

6. Is the left footrest included?

No. KAE00018/A is the related left-hand rider-footrest reference and is separate.

7. Is the RH control plate included?

No control-plate inclusion is promised. KAE00015/A is the related RH control-plate reference.

8. Are the pivot pin, spring and circlip included?

Only components physically packed with the assembly are included; treat service hardware as separate unless verified.

9. Does it fit Super Meteor 650?

No direct replacement fitment is claimed without exact VIN-specific catalogue confirmation.

10. Does it fit Classic 650 or Bullet 650?

No fitment is claimed by this listing; verify the exact Royal Enfield reference for the VIN.

11. Does it fit Interceptor 650 or Continental GT 650?

No. Do not assume compatibility because those motorcycles use the same engine family.

12. Is RAE00535 the same footrest?

It is a different RH rider-footrest reference; interchangeability must not be assumed.

13. How can I confirm the side?

Sit on the motorcycle: KAE00017/A is for your right foot beside the brake pedal.

14. What should I compare with the old part?

Compare the part number, pivot width and bore, stop profile, spring arrangement, finish and mounting geometry.

15. Should the mounting plate be inspected?

Yes. Check for cracks, distortion and pivot-bore wear, especially after a fall or collision.

16. Can a bent footrest be straightened and reused?

Heating or straightening can compromise strength. Replace damaged parts according to the approved repair procedure.

17. Is professional installation recommended?

Yes, particularly after impact damage or when related mounting parts are worn or misaligned.

18. What must be checked after installation?

Check secure retention, free folding movement, spring return, stop engagement and brake-pedal/exhaust clearance.

19. Can an installed or scratched footrest be returned?

No. Installed, marked, scratched, modified or incomplete correctly supplied parts are not returnable.

20. How do I avoid ordering the wrong footrest?

Match KAE00017/A, Shotgun 650, the VIN, rider position, RH side, pivot geometry, finish and required hardware.