Royal Enfield Silencer / Exhaust Mounting Damper Rubber – 1570435/C

Genuine Royal Enfield rubber damper used at the silencer / exhaust mounting point. Royal Enfield’s OEM description is “DAMPER SILENCER MOUNTING”. Buyers may also know this part as a silencer mounting rubber, exhaust mounting bush, muffler rubber bush, silencer silent block, exhaust vibration damper or rubber exhaust mount.

The damper cushions the silencer mounting point and helps isolate vibration between the exhaust assembly and the motorcycle mounting hardware. It is a separate component from the metal damper pin / sleeve and from the catalytic-box mounting damper.

Part Identification

What Does This Part Do?

The silencer is not mounted as a completely rigid metal-to-metal assembly. The mounting damper provides a compliant rubber interface at the exhaust mounting point. Its job is to help:

• Isolate normal engine / exhaust vibration from the mounting bracket.
• Reduce direct metal-to-metal transmission at the silencer support point.
• Support correct mounting of the silencer when used with the specified damper pin / hardware.
• Maintain the factory exhaust mounting arrangement instead of using a generic rubber bush.

A damaged or missing damper can allow excess movement, poor alignment, contact, vibration or noise around the silencer mounting area. These symptoms should still be diagnosed across the complete exhaust mount before replacing individual parts.

Confirmed / Catalogue-Supported Model Families

Fitment That Requires Extra Verification

Some independent fitment databases also cross-reference base 1570435 to other newer Royal Enfield motorcycles. Because the current /C suffix is not equally well documented for every model, this listing does not automatically claim universal fitment for Himalayan 450, Guerrilla 450, Bear 650 or other families without an exact VIN/EPC match.

Do not order by appearance alone. Royal Enfield uses multiple exhaust dampers that can look similar but have different dimensions, mounting locations and companion pins.

Quantity — Important

This listing supplies 1 piece. The complete exhaust assembly may use more than one silencer mounting damper.

• Some checked Royal Enfield exhaust diagrams show 2 pieces.
• Other exhaust configurations can use a different quantity.
• Always check the exact model-specific exploded diagram before ordering a full replacement set.

1570435/C vs 1570435/B

Royal Enfield has issued multiple revisions of this base part, including 1570435/A, 1570435/B and 1570435/C. Current genuine-parts databases specifically list 1570435/C as DAMPER SILENCER MOUNTING.

This listing is specifically for 1570435/C. If your old packet, invoice or model parts book shows /B or another suffix, confirm the current supersession through the VIN-based Royal Enfield parts system before substituting revisions.

Do Not Confuse With Related Exhaust Parts

What You Receive

• 1 × Genuine Royal Enfield Silencer Mounting Damper Rubber
• Part Number: 1570435/C

What Is Not Included?

• Silencer / muffler assembly
• Exhaust pipe / header
• Damper pin / sleeve
• Cat-box mounting damper
• Exhaust clamps
• Bolts, nuts or washers
• Silencer-to-pipe seal / exhaust gasket

When Should This Damper Be Replaced?

• The rubber is cracked, split, torn or missing.
• The damper is permanently crushed or badly deformed.
• The inner mounting area has become loose around its pin / hardware.
• The silencer mount has excessive movement after the fasteners are correctly tightened.
• The exhaust has suffered impact damage and the mounting rubber is distorted.
• The original damper was damaged during silencer removal.

Installation & Ordering Notes

• Match the exact 1570435/C part number whenever possible.
• Confirm the quantity required in your motorcycle’s exhaust diagram.
• Inspect the companion silencer-damper pin / sleeve when replacing the rubber.
• Check the silencer bracket and exhaust alignment after any accident or impact.
• Do not lubricate or modify the rubber unless the Royal Enfield workshop procedure specifically instructs it.
• Do not substitute a generic exhaust rubber merely by approximate size.
• Use the model-specific fasteners and torque specifications.
• After installation, verify that the exhaust is secure and does not contact the frame, swingarm, bodywork or other components.

Ordering & Return Note

Please confirm 1570435/C, your exact motorcycle and the required quantity before opening or installing the part. Correctly supplied parts are not returnable for wrong selection, wrong diagnosis or change of mind. Wrong, damaged or missing-item claims should be reported with the required complete unboxing video within 24 hours of delivery.

Frequently Asked Questions

Q: What is 1570435/C?
It is the genuine Royal Enfield rubber damper used at the silencer / exhaust mounting point.

Q: Is it the same as a silencer rubber bush?
Yes. Buyers commonly call it a silencer rubber, muffler mounting bush, exhaust rubber bush, silent block or vibration damper. Royal Enfield’s OEM description is DAMPER SILENCER MOUNTING.

Q: Does this listing include the metal pin?
No. The damper pin is a separate component in assemblies that use one.

Q: How many do I need?
The quantity varies by model and exhaust configuration. Several checked diagrams use two pieces, but always follow the exact EPC for your motorcycle.

Q: Does it fit Meteor 350?
Yes, base part 1570435 is listed in the Meteor 350 exhaust assembly. Older references may show /B, so verify the latest suffix by VIN.

Q: Does it fit Hunter 350?
Yes, base 1570435 is used in Hunter 350 genuine-parts references. Confirm the current suffix against the motorcycle VIN.

Q: Does it fit Classic 350 Reborn?
The 1570435 base part is catalogued for the All-New / Reborn Classic 350 family. Verify the exact suffix for your model year and market.

Q: Does it fit Bullet 350 J-Series?
Yes, the current Bullet 350 exhaust parts book directly lists base part 1570435 as the silencer mounting damper.

Q: Does it fit Goan Classic 350?
Current Euro V catalogue data lists 1570435/C in the Goan Classic 350 silencer / exhaust assembly.

Q: Is 1570435/B the same as 1570435/C?
They are different revision suffixes of the same base part. Do not assume interchangeability without a current Royal Enfield supersession / VIN check.

Buyer Search Terms

Royal Enfield 1570435/C, 1570435C, 1570435, silencer mounting rubber, silencer rubber bush, exhaust mounting rubber, exhaust damper rubber, muffler mounting bush, muffler rubber mount, silencer vibration damper, exhaust silent block, Meteor 350 silencer rubber, Hunter 350 silencer rubber, Classic 350 Reborn silencer mounting bush, Bullet 350 exhaust rubber, Goan Classic 350 silencer damper, genuine Royal Enfield exhaust mounting parts.