Royal Enfield Split Pin 4×32 – Brake Pedal, Footrest & Side Stand – 586045/A

Genuine Royal Enfield 586045/A is the factory SPLIT PIN-BRAKE PEDAL, also documented as a Split Pin 4 × 32. This small retaining pin is reused across multiple Royal Enfield assemblies including brake pedal, rider footrest, side stand and other chassis / control applications.

Part Identification

Short Hook

Use the correct genuine retaining hardware with Royal Enfield 586045/A, the OEM 4×32 split pin used in several brake-pedal, footrest and stand assemblies.

Detailed Product Description

Royal Enfield 586045/A is a genuine split / cotter pin used to mechanically retain clevis pins and related hardware after assembly.

The Bullet 500 parts catalogue identifies this exact part as Split Pin 4 × 32, quantity 1 in the rear brake-pedal assembly. Hitchcock’s parts books also show base number 586045 repeatedly in rider-footrest, side-stand, brake and ABS-related assemblies across multiple Royal Enfield models.

Because it is a generic retaining fastener reused in several locations, the quantity required depends on the exact motorcycle and assembly.

What This Product Is

• Genuine Royal Enfield OEM split pin.
• Cotter / retaining pin.
• Documented size: 4 × 32 mm for 586045/A.
• Used in brake-pedal, footrest, side-stand and related assemblies.
• Sold individually.

What This Product Is Not

• Not a clevis pin.
• Not a brake-rod pin.
• Not a footrest pivot pin.
• Not a washer.
• Not a circlip.
• Not a spring clip.
• Not automatically interchangeable with every Royal Enfield split pin of a different size.

Key Features

• Genuine Royal Enfield factory hardware.
• Correct retaining function where 586045 / 586045/A is specified.
• Simple one-time mechanical locking component.
• Useful during brake, footrest or side-stand overhaul.
• Exact part-number targeting prevents wrong-diameter / wrong-length fastener use.

Buyer Search Names / Internal Search Keywords

586045/A, 586045A, 586045, 586045/C, Royal Enfield split pin, Royal Enfield cotter pin, brake pedal split pin, brake pedal cotter pin, footrest split pin, side stand split pin, 4x32 split pin, 4 mm split pin, retaining pin.

Confirmed / Directly Documented Applications

Important Quantity Note

This part is reused in multiple locations and the quantity depends on the assembly.

• Bullet 500 brake pedal: Qty 1.
• Some rider-footrest assemblies: Qty 2–4.
• Some side-stand assemblies: Qty 1.
• Some ABS / bracket applications: Qty 1.

Shopify Quantity 1 = One Individual Split Pin.

Fitment / Usage Check Before Ordering

Part Number / Revision Notes

Current Royal Enfield 2026 parts data explicitly lists:

586045/A — SPLIT PIN-BRAKE PEDAL

Current genuine-parts price databases also show:

586045/C — SPLIT PIN-BRAKE PEDAL

No reliable blanket supersession from /A to /C was verified. Therefore this listing preserves 586045/A as the exact SKU.

Related / Similar Parts

When Should This Be Replaced?

• Whenever the original split pin has been removed and opened / bent.
• Pin is rusty or weakened.
• Pin leg is broken.
• Pin is missing.
• Brake pedal / footrest / stand is being reassembled after repair.
• Incorrect improvised wire or fastener was previously fitted.

Installation Notes

1. Confirm the EPC specifies 586045 / 586045/A.
2. Confirm the clevis / retaining-pin hole is clean.
3. Insert the new split pin fully.
4. Spread / bend the legs securely according to workshop practice.
5. Do not repeatedly reuse a split pin that has already been bent open.
6. Confirm the retained component cannot move off the clevis pin.

What’s in the Box

1 × Genuine Royal Enfield 586045/A Split Pin 4×32

Return-Prevention Note / Before You Buy

1. Match exact SKU 586045/A.
2. Confirm your assembly calls for the 586045 split-pin family.
3. Do not assume every Royal Enfield split pin is the same size.
4. Check quantity required for your exact assembly.
5. If your packet / EPC says 586045/C, confirm revision compatibility rather than ordering by base number alone.

Correctly supplied fasteners are not returnable or exchangeable because of incorrect size selection, wrong assembly, model mismatch, installation attempt, mechanic recommendation or change of mind. Eligible wrong-item or damaged-item claims require applicable proof and complete unboxing evidence under store policy.

FAQs

What is 586045/A?
It is a genuine Royal Enfield split / cotter pin, documented as Split Pin 4×32 and used in several brake, footrest and stand assemblies.

Is it only for the brake pedal?
No. Royal Enfield reuses base 586045 in multiple assemblies including brake pedal, rider footrest and side stand.

Does it fit Bullet 500 UCE?
Yes. The Bullet 500 brake-pedal EPC directly lists 586045/A, quantity 1.

Does it fit Himalayan 411?
Yes, base 586045 is used in Himalayan 411 footrest / stand assemblies.

Does it fit Interceptor 650 and Continental GT 650?
Yes, base 586045 / 586045/A appears in 650 Twin foot-control and stand documentation.

What size is it?
The Bullet 500 catalogue identifies 586045/A as 4×32 mm.

Does quantity 1 mean a pack?
No. Quantity 1 means one split pin.

What about 586045/C?
/C also exists, but no universal /A-to-/C supersession was verified. Match the exact packet/EPC when revision matters.

SEO Tags

Royal Enfield, Genuine Royal Enfield Parts, 586045/A, 586045A, 586045, 586045/C, SPLIT PIN-BRAKE PEDAL, Split Pin 4x32, Cotter Pin, Brake Pedal Split Pin, Footrest Split Pin, Side Stand Split Pin, Himalayan 411, Continental GT 535, Interceptor 650, Continental GT 650, Classic 350 UCE, Classic 500 EFI, Bullet 350 UCE, Bullet 500 UCE, Electra 350 UCE, Royal Enfield Hardware, OEM Fastener, OEM Spares

Image Filename Suggestions

• royal-enfield-586045-a-split-pin-4x32.jpg
• royal-enfield-brake-pedal-footrest-side-stand-split-pin-586045-a.jpg
• royal-enfield-cotter-pin-586045-a.jpg

Image Alt Text

Genuine Royal Enfield 586045/A split pin 4×32 for brake pedal, footrest and side-stand assemblies

Google Shopping Notes

Competitor Gap Analysis

Most listings call 586045/A only “Split Pin-Brake Pedal,” which hides its wider genuine Royal Enfield usage. This listing captures buyer searches for brake pedal, footrest, side stand and cotter pin, documents the 4×32 size, explains model/application-dependent quantity, and records the /A versus /C revision issue without inventing interchangeability.