Royal Enfield Fuel Tank Badge / Monogram (Gold) for Super Meteor 650 – Right Side (RH) – RAK00362/D

Royal Enfield genuine RAK00362/D is the gold fuel tank badge/monogram – Right Hand (RH) used on select Super Meteor 650 fuel tank paint/graphic variants. This is the correct OEM replacement when the original badge is missing, cracked, faded, or removed during repaint/PPF, and you want factory-correct finish and fitment (shape, thickness, and edge profile).

Also searched as: tank badge RH, fuel tank monogram, tank emblem right side, Super Meteor 650 logo, gold tank badge, name plate.

This is RH only (right side when seated on the bike). The matching left-side badge is typically RAK00363/D (LH)—sold separately. Hitchcocks’ partsbook notes this gold RH badge as standard on specific Super Meteor tank variants (example: Celestial Blue).

Before you buy: confirm you have a Super Meteor 650 and your tank uses the gold badge style (not grey/black). Match by photo/shape + side (RH) before ordering.

Key Features 

• Genuine Royal Enfield Fuel Tank Badge / Monogram – Gold (RH) (RAK00362/D)

• Correct Right Hand side part (RH when seated on the motorcycle)

• Used on select Super Meteor 650 tank variants that carry gold badging (variant-dependent)

• Ideal replacement after repaint, PPF removal, badge loss, or cosmetic restoration

• OEM fit/finish helps avoid misalignment and poor edge quality common in replicas

• Ships as 1 piece (RH only); pair requires separate LH purchase (RAK00363/D)

• Return-prevention: requires photo + side confirmation (not universal across all 650 models)

Compatibility Table

Explicit exclusions: Not a universal Royal Enfield badge; do not assume fitment for Classic/Bullet/Meteor 350/Himalayan/650 Twins without part-number match.

Variants
No variants.

FAQs 

Q1 (Fitment): How do I confirm RAK00362/D is the correct badge for my Super Meteor 650?
A: Confirm three things: (1) bike is Super Meteor 650, (2) your tank uses the gold badge style (not grey/black), and (3) you need the RH side (right side when seated). Best method: photo/shape match with your existing badge.

Q2 (Fitment): What does RH mean here?
A: RH = Right Hand side of the fuel tank when you’re sitting on the motorcycle. LH is the opposite side and usually uses a different part number (commonly RAK00363/D).

Q3 (Comparison): OEM vs aftermarket replica tank badges—what’s the real difference?
A: OEM badges typically match factory shape, edge finish, thickness, and adhesive performance. Many replicas look similar online but often have imperfect curvature, dull plating, or early peel, which leads to rework and returns.

Q4 (Installation): How should I install a new tank badge properly?
A: Remove old adhesive cleanly, degrease the surface, do a dry alignment (use masking tape guides), then press firmly. Avoid washing/rain/heat exposure for ~24 hours for best adhesion.

Q5 (Symptoms): When should I replace the fuel tank badge?
A: If it’s missing, cracked, faded, bent, or lifting at edges, or after repaint/PPF removal where the badge can’t be reused cleanly.

Q6 (Returns-prevention): What should I share to avoid ordering the wrong badge?
A: Send (1) tank-side photo, (2) close-up of the badge area, and (3) whether you need RH or LH. If you have a parts bill/label with the old part number, share that too.