1 0

    Royal Enfield

    Royal Enfield Super Meteor / Shotgun 650 Swingarm Pivot Bore Cap RAR00054/B

    Royal Enfield Super Meteor / Shotgun 650 Swingarm Pivot Bore Cap RAR00054/B

    Rs. 0.00
    Rs. 45.00 Rs. 0.00
    Sale Sold out
    Shipping calculated at checkout.

    Out of stock

     We will notify you once product becomes available.
    Important Order Policy
    Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy

    Royal Enfield Super Meteor / Shotgun 650 Swingarm Pivot Bore Cap RAR00054/B

    Genuine Royal Enfield RAR00054/B Pivot Bore Cap for catalogue-matched swingarm / rear suspension applications.

    Part Identification

    Part Number / SKU RAR00054/B
    Base Search Number RAR00054
    No-Slash Search Number RAR00054B
    Factory/OEM Description Pivot Bore Cap
    Buyer Search Name swingarm pivot bore cap, swing arm pivot cap, swingarm cap, rear suspension pivot cap
    Brand Royal Enfield
    Product Type Rear suspension / swingarm hardware

    Short Hook

    Genuine Royal Enfield RAR00054/B pivot bore cap for catalogue-specified 650 rear suspension / swingarm pivot applications.

    Detailed Product Description

    The Royal Enfield RAR00054/B Pivot Bore Cap is a small genuine rear suspension / swingarm hardware part used around the swingarm pivot bore area on compatible Royal Enfield motorcycles where this exact part number is specified.

    This part is commonly searched as swingarm pivot bore cap, swing arm pivot cap, swingarm cap, rear suspension pivot cap, or simply RAR00054/B.

    Because this is a small chassis hardware part, order by exact part number and parts-catalogue position rather than by visual similarity.

    What This Product Is

    • Genuine Royal Enfield spare part.
    • Factory description: Pivot Bore Cap.
    • Exact SKU: RAR00054/B.
    • Small cap used around the swingarm pivot bore / rear suspension area.
    • Normally shown as quantity 2 in rear suspension parts diagrams where applicable.

    What This Product Is Not

    • Not the swingarm / swinging arm assembly.
    • Not the swingarm spindle.
    • Not the needle roller bearing.
    • Not the bearing seal.
    • Not the thrust washer.
    • Not the rear shock absorber.
    • Not the chain adjuster.
    • Not a universal rubber/plastic cap for every Royal Enfield model.

    Key Features

    • Genuine Royal Enfield OEM part.
    • Exact part number: RAR00054/B.
    • Used in catalogue-matched swingarm / rear suspension pivot bore applications.
    • Useful during rear suspension service, swingarm repair, accident repair, or missing cap replacement.
    • Clear return-prevention wording for a small part that can be confused with washers, bearings, seals, and spindle parts.

    Buyer Search Names / Internal Search Keywords

    RAR00054/B, RAR00054B, RAR00054, pivot bore cap, swingarm pivot bore cap, swing arm pivot bore cap, swingarm cap, swing arm cap, rear suspension pivot cap, rear suspension cap, Super Meteor 650 swingarm pivot cap, Shotgun 650 swingarm pivot cap, Royal Enfield rear suspension hardware.

    Confirmed Compatibility Table

    Brand Model / Application Status Ordering Note
    Royal Enfield Rear suspension / swingarm pivot applications where RAR00054/B or matching RAR00054 catalogue reference is specified Confirmed by part number and rear suspension parts-book reference Match old cap, parts diagram position, and exact part number before ordering.
    Royal Enfield Super Meteor 650 / Shotgun 650 rear suspension applications Use where exact parts catalogue / old part confirms RAR00054/B Do not order only by model name; verify the rear suspension diagram and old part.

    Fitment Not Confirmed / Check Before Ordering Table

    Model / Situation Status Reason to Check
    Bear 650 / Classic 650 / other new 650 variants Check before ordering 650 platform does not automatically confirm the same rear suspension cap.
    Motorcycle with repaired or replaced swingarm Check before ordering The fitted swingarm may not match the original catalogue for the motorcycle.
    Missing old cap Check before ordering Confirm using VIN-based EPC or rear suspension diagram before ordering.

    Not Compatible / Do Not Order For

    Model / Part Family Caution
    Classic 350 UCE / Bullet 350 UCE / Electra UCE / Thunderbird Older UCE rear suspension and swingarm hardware must be checked separately.
    Classic 350 Reborn / New Bullet 350 J-Series / Meteor 350 / Hunter 350 Do not assume J-Series 350 compatibility without exact EPC confirmation.
    Himalayan 411 / Scram 411 / Himalayan 450 / Guerrilla 450 Different rear suspension and swingarm hardware applications.
    Interceptor 650 / Continental GT 650 Different 650 Twin chassis application; do not order unless old part/EPC confirms RAR00054/B.
    Bear 650 / Classic 650 Not added as confirmed without exact old part / EPC confirmation.

    Part Number / Supersession Notes

    • Use exact SKU: RAR00054/B.
    • Search variants: RAR00054B and RAR00054.
    • Parts diagrams may show the base number RAR00054, while price/part-number sources show the full suffix RAR00054/B.
    • No safe supersession is claimed here.

    Similar Parts Comparison

    Part / Item Use Important Difference
    RAR00054/B Pivot bore cap This listing.
    RAR00004/B Spindle, swingarm M16 Spindle/shaft; not the cap.
    RAR00165/C Needle roller bearing Bearing; not the cap.
    RAR00302/A Seal Seal; not the pivot bore cap.
    1050121 Thrust washer Washer; not the cap.
    1050122 Spindle bearing seal Seal; not the cap.

    When Should This Be Replaced?

    • Pivot bore cap is missing.
    • Cap is cracked, damaged, loose, or worn.
    • Rear suspension / swingarm area has been repaired.
    • Swingarm service requires the catalogue-specified cap replacement.
    • Removed old part or EPC confirms RAR00054/B.

    Recommended Related Parts to Check

    • Swingarm spindle.
    • Needle roller bearings.
    • Spindle bearing seals.
    • Thrust washers.
    • Rear shock absorber mounting hardware.
    • Chain adjuster components.
    • Rear suspension area after fall or accident damage.

    What’s in the Box

    1 × Genuine Royal Enfield Pivot Bore Cap RAR00054/B

    Swingarm, spindle, bearings, seals, thrust washers, nuts, bolts, chain adjusters, and rear shock absorber parts are not included unless separately supplied.

    Installation Notes

    • Match the old cap and rear suspension diagram before fitting.
    • Check whether the motorcycle requires one piece or two pieces before ordering quantity.
    • Inspect nearby seals, bearings, and swingarm spindle during rear suspension service.
    • Do not force-fit this cap into an unmatched swingarm or chassis application.

    Return-Prevention Note

    This is a Pivot Bore Cap, part number RAR00054/B. It is not the swingarm, not the swingarm spindle, not a bearing, not a seal, not a washer, and not a universal Royal Enfield cap. Order only after confirming the old part number or the rear suspension parts catalogue.

    FAQs

    What is RAR00054/B?

    RAR00054/B is a genuine Royal Enfield pivot bore cap used in catalogue-matched rear suspension / swingarm pivot applications.

    Is this a swingarm spindle?

    No. The swingarm spindle is a different part. This listing is only for the pivot bore cap.

    How many pieces are required?

    Some rear suspension diagrams show normal quantity 2. This listing is for 1 piece unless quantity selected is higher.

    Can this fit Super Meteor 650 or Shotgun 650?

    Use it only where the old cap, packet, or rear suspension EPC confirms RAR00054/B or matching RAR00054 reference.

    Can this fit Interceptor 650 or Continental GT 650?

    Do not order for Interceptor 650 or Continental GT 650 unless the exact old part or EPC confirms RAR00054/B.

    Are bearings or seals included?

    No. Bearings, seals, washers, spindle, and other rear suspension hardware are not included unless specifically supplied.

    SEO Tags

    Royal Enfield, Genuine Royal Enfield Parts, RAR00054/B, RAR00054B, RAR00054, Pivot Bore Cap, Swingarm Pivot Bore Cap, Swing Arm Pivot Bore Cap, Swingarm Cap, Swing Arm Cap, Rear Suspension Part, Swingarm Hardware, Super Meteor 650, Shotgun 650, 650 Rear Suspension, Motorcycle Chassis Part

    Image Alt Text

    • Genuine Royal Enfield RAR00054/B swingarm pivot bore cap
    • Royal Enfield pivot bore cap RAR00054/B rear suspension hardware
    • Royal Enfield Super Meteor Shotgun 650 swingarm pivot bore cap RAR00054/B

    Verify Fitment on Official Brand Portals

    For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

    Royal Enfield Official Spares Portal

    Hero MotoCorp Official eCatalogue

    View full details

    Become a Dealer Partner

    We supply 100% genuine OEM parts to workshops and dealers across India. Our team will reach out within 24 hours.

    100% Genuine OEM Parts
    Dedicated Account Manager
    Next-Day Dispatch
    Exclusive Dealer Pricing