Fuel Tank Sticker Top (Decal) for Royal Enfield Classic 500 EFI / Classic 500 Euro 3 – 591182/A (Tank Sticker TOP)

Royal Enfield 591182/A is the genuine Fuel Tank Sticker TOP (top decal) used on the Classic 500 EFI / Classic 500 Euro 3 fuel tank sticker set. It’s the correct replacement when your original top sticker has peeled, faded, bubbled, cracked, or got damaged during tank repainting, denting work, ceramic/PPF prep, or fuel cap area cleaning.

Because this is an OEM decal, the size, cut, and placement alignment matches the factory tank design—important for restorations and for avoiding “aftermarket mismatch” (wrong proportions, poor adhesive, or incorrect print tone). This part is commonly searched as tank top sticker, fuel tank top decal, petrol tank sticker, tank sticker TOP, and Classic 500 EFI tank decal.

Before you buy: this part number is consistently referenced under Classic 500 EFI / Classic 500 Euro 3 fuel tank fiche/catalogue—do not assume it fits Classic 350 UCE, J-Series, or other models. Please match your tank/sticker layout by photo before dispatch.

Key Features 

• Genuine Royal Enfield part: 591182/A – Tank Sticker TOP (fuel tank decal)

• Listed in Royal Enfield Classic EFI parts catalogue under Fuel Tank group as Tank Sticker TOP (591182)

• Confirmed on Classic 500 Euro 3 fuel tank parts diagram as Tank Sticker TOP (591182A)

• Clean restoration fix for peeling/faded top tank decal (near cap area)

• OEM cut/fitment for correct placement and symmetry

• Best used during tank repaint, sticker refresh, or full Classic 500 cosmetic restoration

• Return-prevention: confirm model + year + EFI/Euro3 and match sticker design by photo before ordering

• Recommended install practice: apply on fully cured paint; use mild soap-water alignment method if required (professional preferred)

Compatibility Table (Critical)

Variants
No variants.

FAQs

Q1 (Fitment): How do I confirm 591182/A is the correct top sticker for my bike?
Share a clear photo of your fuel tank from top + both sides (showing existing sticker layout). Also confirm if your bike is Classic 500 EFI / Classic 500 Euro 3. This part is referenced in those catalogues/diagrams specifically.

Q2 (Fitment): Will this fit Classic 350 UCE or Classic 350 Reborn (J-Series)?
Not confirmed. Tank graphics and sticker sets vary by platform and year. Order only after photo match of the sticker shape/placement and verification of your exact model/platform.

Q3 (Comparison): OEM tank sticker vs local aftermarket decal—what’s the real difference?
OEM typically matches factory dimensions, cut lines, and adhesive quality, which matters for alignment and long-term durability (especially around the fuel cap area where cleaning and fuel spills happen).

Q4 (Installation): Any tips to install a fuel tank sticker cleanly?
Apply only on clean, degreased, fully cured paint. Avoid wax/polish residue. Use masking tape to mark alignment, and consider wet application (soap-water) only if you know the technique—otherwise install dry or via a professional sticker installer.

Q5 (Symptoms): When should I replace the tank top sticker?
If you see peeling edges, bubbles, fading, cracking, or the sticker tears during detailing/paint correction. It’s also recommended after tank repainting or dent repair.

Q6 (Returns-prevention): What do you need from me before dispatch to avoid wrong orders?
Send (1) bike model + year, (2) photo of RC or chassis plate if available, and (3) tank photos (top + sides). For decals, photo match is mandatory because similar names exist across models.