Royal Enfield UCE Heel & Toe Gear Lever with Rubber – Classic, Bullet, Electra & Trials – KLA00014/A

Royal Enfield Genuine UCE Gear Lever with Rubber – KLA00014/A

Replace a bent, worn, damaged or incompatible gear shifter on applicable Royal Enfield UCE motorcycles with this genuine Royal Enfield gear lever with rubber.

Part number KLA00014/A is catalogued as “GEAR LEVER WITH RUBBER”. It is a heel-and-toe style gear-change lever with a rubber-covered front toe peg and is specifically required when fitting the Royal Enfield Compact Engine Guard 1760155/A / kit 1990687 on the applicable older UCE models listed below.

What This Product Is

• Genuine Royal Enfield gear-change lever
• Exact part number: KLA00014/A
• Official description: Gear Lever With Rubber
• Heel-and-toe gear-shifter layout
• Rubber-covered front toe contact point
• Position: Left side / gear-change shaft
• Quantity supplied: 1 gear lever

Confirmed Compatibility

Compact Engine Guard Fitment

KLA00014/A has an important genuine-accessory application on the older UCE platform.

When installing the Royal Enfield Compact Engine Guard 1760155/A / accessory kit 1990687, the standard gear shifter must be replaced with KLA00014/A on the applicable Classic 350, Classic 500, Electra 350, Bullet 350, Bullet 500 and Trials 500 models.

This makes KLA00014/A particularly useful when the original gear lever interferes with the compact engine-guard layout.

Important 570244/C Note

Many older UCE motorcycles use 570244/C as the standard heel-and-toe gear lever. KLA00014/A is a separate genuine Royal Enfield service part and is used as an alternative in specific applications, including the Compact Engine Guard installation described above.

Do not assume KLA00014/A universally replaces 570244/C on every motorcycle that uses 570244/C. Match the model, original lever geometry and parts catalogue before ordering.

Fitment Not Confirmed for These Models

• Thunderbird 350 / Thunderbird 500
• Thunderbird X 350 / 500
• Continental GT 535

These motorcycles may share other UCE drivetrain components, but this listing does not claim KLA00014/A compatibility without model-specific confirmation.

Not Compatible With

• Classic 350 Reborn / New Classic 350 J-Series
• New Bullet 350 J-Series
• Meteor 350
• Hunter 350
• Himalayan 411 / Himalayan 450
• Scram 411 / Scram 440
• Guerrilla 450
• Interceptor 650
• Continental GT 650
• Super Meteor 650 / Shotgun 650 / Bear 650 / Classic 650

Key Features

• Original Royal Enfield genuine spare part
• Correct UCE-era gear-shaft mounting design for the confirmed models
• Heel-and-toe shifting layout
• Rubber-covered front peg for grip and rider comfort
• Useful for standard replacement or Compact Engine Guard conversion
• Direct mechanical replacement when used on the correct application

What You Will Receive

1 × Royal Enfield genuine gear lever with rubber, part number KLA00014/A.

Not Included Unless Physically Supplied

• Gear-shaft pinch bolt / fixing bolt
• Additional rubber sleeve
• Footrest
• Compact Engine Guard
• Engine-guard mounting hardware
• Gearbox internal components
• Installation labour

Technical Details

When Replacement May Be Required

• Original gear lever is bent after a fall
• Rubber contact pad is badly worn or missing
• Lever sits at an incorrect angle after impact damage
• Spline area or clamp section is worn
• Standard lever interferes with Compact Engine Guard 1760155/A
• Motorcycle is being restored to the correct genuine UCE setup

Installation Note

• Confirm the lever part number and motorcycle model before removing the original.
• Compare the offset, spline position and pedal clearance with the old lever.
• Inspect the gearbox selector shaft splines for wear or damage.
• Position the lever so both toe and heel operation are comfortable and clear of the footrest and engine guard.
• Use the correct genuine fixing hardware and torque.
• After fitting, cycle through the gears with the motorcycle stationary before riding.
• Confirm the lever does not contact the engine guard, crankcase, exhaust or footrest during full movement.

Buyer-Focused FAQs

What is KLA00014/A?
It is a genuine Royal Enfield gear lever with rubber for applicable older UCE motorcycles.

Does it fit Classic 350 UCE?
Yes.

Does it fit Classic 500?
Yes.

Does it fit Bullet 350 and Bullet 500 UCE?
Yes.

Does it fit Electra 350?
Yes.

Does it fit Trials 500?
Yes.

Why is KLA00014/A required with the Compact Engine Guard?
The standard gear shifter can interfere with the compact 22 mm engine-guard arrangement. KLA00014/A provides the required gear-lever configuration for that genuine accessory installation.

Is this the same part as 570244/C?
No. They are separate Royal Enfield part numbers. KLA00014/A can be used as the required alternative in specific applications, but it should not be treated as a universal supersession for 570244/C.

Does it fit Thunderbird 350/500?
Fitment is not confirmed in this listing. Verify the exact parts catalogue before ordering.

Does it fit Continental GT 535?
Fitment is not confirmed in this listing. Do not order based only on the shared UCE engine family.

Does it fit Classic 350 Reborn?
No. The Reborn uses the newer J-Series platform and a different gear-shifter system.

How many levers are supplied?
One genuine gear lever.

Order Verification & Return Prevention

Before ordering, confirm the motorcycle is one of the compatible older UCE models and match part number KLA00014/A. If the lever is being purchased for an engine-guard installation, confirm the guard is the compatible Compact Engine Guard 1760155/A / kit 1990687.

Gear levers that have been fitted onto the spline, tightened, scratched, bent, modified, ground or otherwise used are not eligible for return due to incorrect fitment selection or installation errors.

MRP Note

The Royal Enfield India February 2024 genuine-parts price list records KLA00014/A – GEAR LEVER WITH RUBBER – ₹240 MRP – HSN 87141090 – GST 28%. Always verify the MRP printed on the latest genuine package before dispatch because Royal Enfield may revise prices.