• Royal Enfield 148659/B rubber stop — Interceptor/GT 650 stand bumper CENTER STAND RUBBER FOR GT 650
1 2

UNDER THE HOOD

Royal Enfield Rubber Stop (Stand Bumper / Stopper) — Interceptor 650 & Continental GT 650 (E4/E5) — 148659 → 148659/B (Superseded OE)

Royal Enfield Rubber Stop (Stand Bumper / Stopper) — Interceptor 650 & Continental GT 650 (E4/E5) — 148659 → 148659/B (Superseded OE)

Rs. 34.00
Rs. 35.00 Rs. 34.00
Sale Sold out
Shipping calculated at checkout.
Important Order Policy
Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy

Stop metal-to-metal clunks and protect the frame/stand with the genuine Royal Enfield Rubber Stop — Part No. 148659 (superseded to 148659/B). This small OE buffer sits on the stand assembly and acts as the stopper/bumper when the side or center stand returns to its parked position. Because it’s OEM, the compound, shoulder profile and bore match the factory bracket, so it seats firmly, absorbs impact and lasts longer than generic rubbers.

Fitment is verified on the Interceptor 650 (Euro 4) stand fiche where 148659/B “RUBBER STOP” is listed, and dealer catalogs confirm use on INT650 BS6 as well. The part also appears in the 650 Continental GT parts book (Stands group). Replace whenever your stand hits the frame, the rubber has perished, or you’ve repainted/powder-coated the stand. (Only confirmed models are listed below to keep returns at zero.) 

Key Features

  • OE identity & supersession: 148659 Rubber Stop → 148659/B (current supply). 

  • Listed under Stand Assy for the platform; direct plug-fit to the OE bracket. 

  • Correct factory rubber compound → reduces noise, prevents paint chafing.

  • Keeps stand return smooth; protects frame tabs and stop faces.

  • Quick install; no trimming or fabricating required.

  • Low-cost preventive replacement during stand service/repaint.

Compatibility Table

Model Engine / Platform BS/Euro Stage Years Source
Interceptor 650 (INT650) 648 cc Twins Euro 4 2019–2020* Stands fiche lists 148659/B “RUBBER STOP.” 
Interceptor 650 (INT650) 648 cc Twins BS6 / Euro 5 2020–present 148659 FOR INT650 BSVI. 
Continental GT 650 648 cc Twins E4/E5 2019–present Product code 148659. 

*Year spans vary by market; always confirm on your VIN fiche.

Variants

  • 148659/B — Rubber Stop (current OE supply) (ships when supersession applies).

  • Legacy code 148659/A → replaced by 148659/B. 

FAQs

Q1. Is this for the side stand or center stand?
It’s the rubber stop used in the Stand Assy, acting as the bumper where the stand meets the stop tab. Check your fiche image to see its position. 

Q2. Will it fit my BS6 Interceptor 650?
Yes—dealer catalogs list 148659 for INT650 BSVI; Euro 4 fiche shows 148659/B on INT650 Stands.

Q3. Does it also fit the Continental GT 650?
Yes—the GT 650 parts book (Stands page) includes Product code 148659. 

Q4. Is 148659/B different from 148659/A?
/A is superseded to /B. Order by the latest code shown on your VIN fiche/box label. 

Q5. When should I replace it?
If the stand bangs the frame, the rubber is missing/hard, or after repainting the stand.

Q6. Any install tips?
Clean the boss, press the bumper fully home; a dab of mild soapy water helps seating. Allow to dry before use.

Verify Fitment on Official Brand Portals

For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

Royal Enfield Official Spares Portal

Hero MotoCorp Official eCatalogue

View full details