SAP Swiss Electric
SAP Swiss SAP-0191B Battery Terminal Set (+/-) with Caps for Royal Enfield Machismo ES, Thunderbird & TVS
SAP Swiss SAP-0191B Battery Terminal Set (+/-) with Caps for Royal Enfield Machismo ES, Thunderbird & TVS
Couldn't load pickup availability
Please confirm the part number and compatibility before ordering.
Complete Your Order
Motul Chain Maintenance Kit – C1 Chain Cleaner + C2 Chain Lube Road (150ml Each) – Motorcycle O-Ring/X-Ring/Z-Ring Compatible
33081208 - Metal Polishing - 15Gms Royal Enfield Metal Polish Chrome Polish For Bullet
Adds: 15 GMS
SAP Swiss SAP-0191B Battery Terminal Set – Positive & Negative with Caps
Repair worn, corroded or damaged battery cable terminals on selected older Royal Enfield and TVS motorcycles with the Swiss SAP-0191B terminal set. It includes a positive (+) and negative (−) metal terminal lug together with colour-coded protective caps. The red cap identifies the positive side and the black cap identifies the negative side.
The SAP-0191B is a Swiss-branded aftermarket electrical replacement part, not a Royal Enfield or TVS genuine OEM item. It is intended for the motorcycle applications and battery connections specifically catalogued for this part number. Always compare the battery bolt/stud, lug-hole opening and cable-end size before ordering; a model name alone is not sufficient to guarantee fitment.
What Is Included?
| Component | Quantity |
|---|---|
| Positive battery terminal lug (+) | 1 |
| Negative battery terminal lug (−) | 1 |
| Red insulating terminal cap | 1 |
| Black insulating terminal cap | 1 |
Pack quantity: 1 positive/negative set (four visible components). Not included: battery, cables/wires, wiring harness, starter relay, battery bolts/nuts or the Under The Hood keychain used in product photography. It is not a complete ready-wired battery cable assembly.
Product Specifications
- Brand / manufacturer: SAP Swiss Electric Pvt. Ltd.
- Swiss part number: SAP-0191B (also written SAP 0191B or 0191B)
- Product: Positive and negative battery terminal connector/lug set with protective caps
- Application category: Selected older electric-start (ES) motorcycles
- Terminal style: Flat ring/eyelet lug with a cable-end barrel, as shown in the product photographs
- Finish: Yellow/gold-coloured metal appearance (exact alloy/plating not specified on packet)
- Electrical rating: Not separately specified by the manufacturer for this item
- Package: 1 set
Royal Enfield Fitment – Catalogued Older ES Models
Swiss lists SAP-0191B for the following Royal Enfield electric-start applications. These are application references, not a promise that every model year uses identical terminals.
| Motorcycle | Swiss catalogue scope | Buyer check |
|---|---|---|
| Royal Enfield Bullet Machismo ES | Older electric-start Machismo models listed by Swiss | Verify battery lugs and existing cable end |
| Royal Enfield Thunderbird ES | Older Thunderbird electric-start models | Exclude newer Thunderbird variants unless checked |
| Royal Enfield Thunderbird 5-Gear ES | 5-speed, electric-start generation | Check year, battery terminal fastening and harness |
| Royal Enfield Thunderbird Twin Spark ES | Electric-start Twin Spark generation listed by Swiss | Do not assume all Thunderbird 350/500 years use this part |
| Royal Enfield Bullet Electra 5S ES | 5-speed electric-start Electra listed by Swiss | Not a blanket fitment for Electra KS |
| Royal Enfield Electra 5-Speed ES | 5-speed ES configuration | Verify existing lug/cap style |
TVS Fitment – Catalogued Older ES Models
The Swiss catalogue also lists this same SAP-0191B part for selected TVS electric-start motorcycles. The term Apache RTR ES here refers to the manufacturer's older catalogue category and must not be taken to mean every newer RTR 160 4V, RTR 200 4V or BS6 variant.
| Motorcycle | Swiss catalogue scope | Buyer check |
|---|---|---|
| TVS Victor GLX 125 ES | Electric-start GLX 125 application listed by Swiss | Not proof of fitment to all Victor/GL variants |
| TVS Apache ES | Older electric-start Apache applications | Not a universal Apache RTR 160/200/4V/BS6 fitting |
| TVS Apache RTR ES | Early/older RTR electric-start applications in Swiss catalogue | Match lug size and actual battery layout |
| TVS Star City ES | Electric-start Star City variant | Not every Star City / Star City Plus generation |
| TVS Star City 110 ES | 110 ES variant listed by Swiss | Confirm cable and battery stud |
| TVS Star Sport ES | Electric-start Star Sport | Confirm battery terminals before purchase |
How to Choose the Correct Swiss Battery Terminal
Do not choose solely because your motorcycle says Bullet, Electra, Thunderbird or Apache. Swiss lists multiple battery-terminal designs for different generations.
| Swiss reference | Manufacturer catalogue description | What it means for you |
|---|---|---|
| SAP-0191B – This product | Positive + negative terminals with caps; listed older Machismo ES, Thunderbird ES, Electra ES and selected TVS ES models | Select only after comparing existing battery terminal geometry and cable ends |
| SAP-0191C | Older kick-start / AC-DC Machismo, Electra KS/AVL and certain Bullet KS applications | Different application group. Do not assume 0191B replaces 0191C |
| SAP-0191G | Certain Thunderbird 350/500 ES 2013 and Classic 500 EFI application references | Later-model alternative: check the exact battery terminal before selecting |
Not confirmed: Royal Enfield Classic 350 Reborn, J-series Bullet 350, Meteor 350, Himalayan/Guerrilla, newer Thunderbird 350X/500X; all Apache RTR 160 4V/200 4V/BS6/OBD generations; and all kick-start-only bikes. No compatibility claim is made for these versions without separate verification.
When Would You Need This Part?
- A loose, worn, cracked or mechanically damaged positive or negative battery wire lug
- A corroded terminal eyelet that no longer makes a reliable connection after inspection
- A missing or damaged positive/negative protective terminal cover
- Restoring an older electric-start motorcycle to a clean and properly secured battery connection
- Replacing a terminal that has overheated due to a loose connection, after the underlying cause is corrected
Important: Hard starting, dim lights or intermittent power can also be caused by the battery itself, charging system, grounding, starter relay, harness or fuses. This set is not a guaranteed cure for those symptoms.
Installation & Safety
- Turn off ignition and disconnect battery power. Remove the negative (−) connection first, then positive (+).
- Compare your original lug-hole diameter, cable gauge/barrel size, terminal orientation and protective cover style with SAP-0191B before cutting or removing the original terminal.
- Have a qualified motorcycle electrician make a sound, corrosion-resistant cable termination with a suitable professional tool and correct cable preparation.
- Install the red cover on positive and black cover on negative. Confirm no exposed conductive metal can short against the frame or battery compartment.
- Reconnect positive (+) first, then negative (−); secure fasteners to the battery manufacturer's instructions. Inspect cable routing, clearance and electrical operation.
Do not reverse battery polarity. A loose or incorrectly fitted connection can overheat, fail to crank the engine or damage the wiring. Installation should be performed by a qualified technician when in doubt.
Frequently Asked Questions
Q. Is SAP-0191B a complete positive and negative battery terminal set?
A. Yes. The pictured set consists of two metal battery connection lugs and the red and black protective caps. It is supplied as one set.
Q. Does the set include battery wires or a battery cable harness?
A. No. It includes loose terminal ends and caps, not preattached battery cables or a complete harness.
Q. Does this fit a Royal Enfield Bullet Machismo electric-start model?
A. Swiss lists Bullet Machismo ES. Check the original battery lug hole, wire gauge and terminal orientation before purchase.
Q. Can I use it for Bullet Machismo kick-start or AC/DC KS?
A. Do not assume so. Swiss separately lists SAP-0191C for certain Machismo KS and AC/DC variants.
Q. Is it suitable for Thunderbird 350 and Thunderbird 500?
A. It is listed for older Thunderbird ES, 5-gear ES and Twin Spark ES applications. Swiss also has SAP-0191G for some later Thunderbird 350/500 applications. Compare the exact generation and existing terminal.
Q. Does it fit Electra 5S or Electra 5-speed ES?
A. The manufacturer lists both Electra 5S ES and Electra 5-Speed ES application groups. Kick-start Electra models require a separate compatibility check.
Q. Is it compatible with every Royal Enfield Classic 350 or 500?
A. No. The SAP-0191B manufacturer list does not establish universal Classic fitment; do not order solely by the Classic model name.
Q. Will SAP-0191B fit TVS Apache RTR 160 4V or 200 4V BS6?
A. Not verified. Swiss lists older Apache ES / Apache RTR ES application categories but does not establish the current 4V, BS6 or OBD generations.
Q. Does this fit TVS Victor GLX 125 ES?
A. Swiss lists Victor GLX 125 ES. Check the original connection sizes and battery assembly before purchase.
Q. Can I use this as a Star City or Star Sport battery terminal?
A. Swiss lists Star City ES, Star City 110 ES and Star Sport ES variants. Other generations and kick-start versions have not been verified.
Q. Are the red and black covers included?
A. Yes. The photographs show one red and one black terminal cover for the positive and negative sides.
Q. Does it include nuts, bolts or battery-post adapters?
A. No separate battery fasteners or adapters are shown in the pack contents. Retain or source suitable fasteners as required by your battery.
Q. Can this replace a damaged negative battery earth terminal?
A. Potentially, if the original lug dimensions, cable size and battery stud match. Ensure the chassis earth connection and cable itself are also sound.
Q. Is it a battery clamp or ring-terminal eyelet?
A. The photographed hardware is a flat eyelet/ring-style cable lug, not a large automotive lead-post clamp. Match the physical terminal type.
Q. Do I need one set or two sets for one motorcycle?
A. One set contains one positive and one negative terminal. If replacing both ends on one motorcycle, one set is generally the quantity required, subject to the wiring arrangement.
Q. What is the difference between SAP-0191B and SAP-0191C?
A. SAP-0191B is catalogued for selected older ES configurations with positive/negative caps. SAP-0191C is separately catalogued for certain KS and Machismo AC/DC models. They are not confirmed interchangeable.
Q. Will replacing terminals fix a bike that will not self-start?
A. Only if faulty battery connections are the real cause. The battery, starter relay, fuse, cable continuity, grounding and charging system may also need diagnosis.
Q. Is this genuine Royal Enfield or TVS OEM?
A. No. It is a Swiss/SAP-branded aftermarket battery-terminal replacement.
Q. How should I check fitment before ordering?
A. Compare your motorcycle's full model/year, original terminal eyelet hole, cable gauge, terminal bend direction, battery fastening and red/black boot arrangement. If uncertain, request a mechanic's comparison.
Important Order Information
This listing is for one SAP Swiss SAP-0191B battery terminal set, not a complete wiring harness, battery or starter relay. Use the manufacturer-listed model information as a starting point and verify the physical terminal design before installation. Keep the unopened pack and compare the part number before cutting or modifying the wiring. After wiring or electrical components have been fitted, return eligibility is subject to Under The Hood's published policy.
Share
Verify Fitment on Official Brand Portals
Verify Fitment on Official Brand Portals
For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.
Royal Enfield Official Spares Portal
Hero MotoCorp Official eCatalogue

Become a Dealer Partner
We supply 100% genuine OEM parts to workshops and dealers across India. Our team will reach out within 24 hours.