Silencer Guard / Heat Shield (HR Black) for Royal Enfield Himalayan 411 (Euro 5 / BS6) – RLX00789/D

The Royal Enfield Genuine Silencer Guard (HR Black) is the factory-type exhaust heat shield that bolts onto the Himalayan’s silencer to reduce accidental contact burns, protect the muffler body from trail scuffs, and restore the OEM look after damage or rust. This is the correct replacement when your guard is cracked, missing, rattling, or the mounting points have elongated from vibration. OEM fitment matters here because the mounting hole pitch, curvature, and clearance around the silencer and side panel must match—especially on the Euro 5/BS6 exhaust layout.

Also searched as: muffler guard, exhaust heat shield, silencer plate, exhaust protector, heat cover for Himalayan.

Before you buy: confirm your bike is Himalayan 411 Euro 5 / BS6 and match the guard shape + bolt positions with your existing part photo.

Key Features 

• Genuine Royal Enfield silencer guard / heat shield (HR Black finish)

• Designed to reduce heat-contact risk for rider/pillion leg area

• Helps protect the muffler surface from scratches and trail impacts

• Bolt-on fitment on supported Himalayan Euro 5/BS6 exhaust setup (verify photo)

• Factory-style look; correct curvature and mounting alignment vs generic guards

• Ideal replacement for cracked, missing, noisy, or corroded guard

• Part-number based ordering reduces wrong fitment returns

• Notes supersession in catalog: RLX00789/A → RLX00789/B (regional/older reference)

Compatibility Table

Explicit exclusions: Not for Classic 350/500 UCE, Bullet UCE, J-Series 350, 650 Twins, or aftermarket slip-on exhausts unless the stock silencer mounting matches.

Variants

No variants.

FAQs 

Q1 (Fitment): How do I confirm RLX00789/D is correct for my Himalayan?
Check (1) your bike is Himalayan 411 Euro 5/BS6, and (2) match the existing guard’s shape + bolt-hole spacing with your current part photo before ordering.

Q2 (Fitment): Will this fit BS4 (older) Himalayan 411?
Not safely confirmed across consistent dealer sources. Some listings imply broader coverage, but verified references strongly indicate Euro 5 / BS6 applications. If your BS4 muffler has identical mounting points, it may work—order only after photo match.

Q3 (Comparison): OEM vs aftermarket silencer guard—what’s the real difference?
OEM typically matches curvature, mounting hole alignment, and clearance exactly, reducing rattles and installation stress. Aftermarket guards often vary in hole pitch and offset, leading to vibration noise or improper seating.

Q4 (Installation): Any precautions during installation?
Install on a cold exhaust. Align the guard loosely first, then tighten bolts evenly. Use thread-lock only if your service manual recommends it, and avoid over-torquing thin guard mounts.

Q5 (Symptoms): What problems does a new silencer guard solve?
Common fixes: missing guard, rattling guard, cracked/bent shield, heat contact discomfort, and muffler surface protection for daily + touring use.

Q6 (Returns-prevention): What should I send you to avoid a wrong order?
Share a clear photo of your silencer area + current guard (side view) and confirm BS stage / year. If the bolt pattern differs, do not order.