Genuine Royal Enfield spoke nipple — Part No. 110349, supplied as a pack of 20 pieces. Use OE nipples for clean tensioning and long-term true on Classic 350/500 UCE, Bullet 350/500 UCE, Electra 350 UCE, Thunderbird 350/500 (TBTS/NTB).
Most RE spoked wheels use 36 or 40 nipples—order the number of packs you need (e.g., 2 packs for 40; 2 packs for 36 leaves 4 spares). Always match quantities and spoke part numbers to your VIN fiche.

Key Features 

• Pack size: 20 pcs per pack (110349).

• OE thread & seat for RE rims/spokes → smooth torque, fewer rounded flats.

• Ideal for full rebuilds or topping up spares.

• Pair with VIN-listed OE spokes for your hub/rim.

Compatibility 

• Classic 350/500 UCE, Bullet 350/500 UCE, Electra 350 UCE, Thunderbird 350/500 (TBTS/NTB).
  (Match by VIN fiche; Himalayan/J-series use different PNs.)

How Many Packs Do I Need? (new quick table)

FAQs 

1) Does 110349 fit Classic 350/500 UCE and Bullet 350/500 wheels?
Yes—110349 OEM spoke nipples are used across many Classic 350/500 UCE and Bullet 350/500 UCE wheels. Always match to your VIN microfiche to confirm exact fit for your rim and hub.

2) How many 110349 nipples do I need for one wheel (36 or 40 spoke)?
Most Royal Enfield UCE wheels are 36-spoke or 40-spoke. Buy 2 packs (40 pcs) for either wheel; you’ll have 4 spares for a 36-spoke build. Check your VIN fiche for the official count.

3) Will these work on Thunderbird (TBTS/NTB) and Electra 350 UCE?
Commonly yes—dealers map 110349 to Thunderbird 350/500 (TBTS/NTB) and Electra 350 UCE. Verify on your wheel diagram before ordering.

4) Are these stainless or plated steel nipples? Which is better for corrosion?
110349 is supplied to Royal Enfield OE spec and finish (plated). For best results in rain/sea air, keep spokes/nipples clean and use proper anti-seize during a full wheel rebuild.

5) Can I mix 110349 OE nipples with aftermarket spokes?
Avoid mixing. Thread pitch and seat angle vary; mixing causes galling, seized nipples, and uneven tension. Use OE nipples with OE spokes listed for your VIN.

6) Front vs rear wheel—does 110349 fit both?
Many Classic/Bullet/Thunderbird UCE wheels use the same 110349 nipple front and rear, but some variants differ. Check the fiche for each wheel to prevent returns.

7) My wheel keeps loosening spokes—will new nipples fix it?
Fresh OEM spoke nipples (110349) help achieve accurate torque and smooth truing. Also inspect spokes, rim holes, and hub flange; re-true after 100–200 km to lock in tension.

8) Is 110349 the same as 593351 or other nipple part numbers?
No—Royal Enfield uses multiple nipple PNs by platform (e.g., Himalayan, J-series) and even by front vs rear. If your fiche shows 593351 or another PN, order that exact number.

9) Are these sold individually or in bulk? How many packs should I buy?
Sold as a pack of 20. For one wheel: 2 packs. For a pair of 36-spoke wheels: 4 packs (80 pcs) → leaves 8 spares. This is the easiest way to stock Royal Enfield wheel hardware for future truing.