UNDER THE HOOD
Tail Light Wiring Harness for Royal Enfield Classic 350 Reborn & Bullet 350 (BS6) | 1100581/C | Genuine OEM
Tail Light Wiring Harness for Royal Enfield Classic 350 Reborn & Bullet 350 (BS6) | 1100581/C | Genuine OEM
Couldn't load pickup availability
Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy
The Royal Enfield 1100581/C Tail Light Harness is a genuine OEM rear tail lamp wiring sub-harness designed to restore factory-correct electrical connection at the tail light assembly. If you’re facing tail light not working, intermittent brake light, loose connector issues, cut/short wires after an accessory install, or brittle wiring from heat/water ingress, replacing the harness is the most reliable fix versus splicing and taping wires.
This is an original Royal Enfield part listed as “HARNESS, TAIL LIGHT” (1100581/C), meaning it matches the factory plug style and wire routing for the correct models.
Model applicability in Indian-market listings is clearly specified for All New Classic 350 (Reborn/J-Series) and Bullet 350 (J-Series), BS6, which is the safest way to keep returns low for wiring parts.
For best results, inspect the tail lamp connector pins for corrosion and ensure the harness is clipped away from sharp edges and moving parts during installation.
Key Features
-
Genuine Royal Enfield OEM tail light harness
-
Part Number: 1100581/C
-
Restores proper tail light connectivity (no “jugaad” joints/splices)
-
Correct OEM connector fitment and routing for confirmed models
-
Fixes common issues: intermittent tail/brake light due to damaged wiring
-
Ideal after tail tidy/mod installs where wiring gets cut or pinched
-
Recommended for clean troubleshooting before replacing the tail lamp unit
-
Suitable for workshop-quality repairs and long-term reliability
Compatibility Table
| Model | Engine/Platform | BS Stage | Years | Fitment Status |
|---|---|---|---|---|
| Classic 350 Reborn (All New Classic 350 / J-Series) | 349cc J-Platform FI | BS6 | 2021–present (model family) | ✅ Confirmed |
| Bullet 350 (New Bullet / J-Series) | 349cc J-Platform FI | BS6 | 2023–present (model family) | ✅ Confirmed |
PLEASE CHECK PART NUMBER BEFORE PURCHASE
❓Not confirmed (excluded to reduce returns)
Meteor 350 / Hunter 350 / Classic 350 UCE / Electra / Standard / 650 Twins / Himalayan/Scram — only order if your old harness is marked 1100581/C.
Variants
-
Single unit (1 tail light harness)
-
Note: Another suffix exists in the same family (1100581/B)—always match your required suffix/part number to avoid mismatch.
FAQs
1) What is 1100581/C used for?
It is the tail light wiring harness (HARNESS, TAIL LIGHT) for the rear tail lamp connection.
2) Will this fix brake light not working?
If the issue is due to a damaged/loose harness, yes. If the harness is fine, check the tail lamp unit, brake switch, and fuse.
3) Is it plug-and-play?
For the confirmed models, it is meant to be OEM-style fitment with the correct connectors—no wire cutting required if the rest of the wiring is stock.
4) Does it include the tail lamp assembly?
No. This listing is for the harness only.
5) How do I confirm before ordering?
Match your old part number (on invoice/packaging) as 1100581/C, or share a clear photo of your existing connector ends.
Share
Verify Fitment on Official Brand Portals
Verify Fitment on Official Brand Portals
For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.
Royal Enfield Official Spares Portal
Hero MotoCorp Official eCatalogue
