TVS Apache RR310 / RTR310 Swingarm Chain Slider / Chain Buffer – N7090090

TVS Apache RR310 / RTR310 Chain Slider (Swingarm Chain Buffer) – N7090090

Exact TVS spare-part number N7090090 identifies the chain buffer / swingarm chain slider used in the model-specific rear swingarm assembly of the TVS Apache RR310 and Apache RTR310. This single replacement component forms the chain-contact wear surface on the swingarm where the moving final-drive chain passes close to the rear suspension assembly.

Also searched as RR310 chain slider, RTR310 swingarm chain guide, chain rubbing pad, chain buffer, drive-chain slipper, swingarm slider or chain protection strip, it is not the chain itself, a sprocket, the chain adjuster, the chain cover or the complete swingarm.

Buyer's critical check: Match the complete part number N7090090 with your motorcycle's TVS parts diagram and confirm the shape and fixing positions of the original slider. Do not order solely because a motorcycle belongs to the 'Apache' model family.

Quick specifications

Verified motorcycle fitment

TVS's swingarm exploded diagrams identify the exact N7090090 component for both the RR310 and RTR310 applications listed below. Individual motorcycles should still be checked against their specific variant, market and latest service-part supersession information.

Not a universal '310' part: Even motorcycles sharing some underlying engine development or parts ecosystem cannot be assumed to share this specific swingarm slider. Match the part number and swingarm geometry, not just engine capacity.

Why the chain slider matters

The rear suspension compresses and extends while the chain travels between the engine sprocket and rear sprocket. A chain buffer gives the chain a designated contact or guide surface at the swingarm, helping limit direct contact with the underlying swingarm in its designed path.

A damaged or missing buffer can leave the swingarm exposed to unnecessary chain contact. Wear of the slider can also indicate that the chain, sprockets, alignment, suspension motion or chain adjustment requires inspection. Replacing the slider does not correct excessive chain slack, incorrect adjustment or faulty sprockets on its own.

This is a wear and protection component, not a performance tuning item. No horsepower increase, chain-life extension, noise reduction figure or particular replacement interval is guaranteed.

Common reasons to inspect or replace the buffer

• The original wear surface is heavily grooved or worn close to its backing or support area.
• The slider has cracked, split, become loose or moved away from the intended contact area.
• A fixing point or mounting eye is damaged.
• The swingarm shows contact or rubbing marks near the chain path.
• There is abnormal mechanical chain noise and the slider has visibly deteriorated.
• During chain-and-sprocket maintenance, the technician identifies slider wear or damage.

Diagnostic note: Chain noise can also result from incorrect slack, dry or damaged chain links, worn sprockets, misalignment or other drivetrain issues. Do not replace the buffer without checking the entire chain path.

N7090090 compared with nearby swingarm part numbers

Related references help identify the correct replacement during repair but do not imply that those parts are supplied in this package or mechanically interchangeable with N7090090. The exact holder description or quantity can vary between RR310 and RTR310 parts books.

Package contents – what you receive

1 × TVS Chain Buffer / Swingarm Chain Slider – N7090090.

Not included: drive chain, front or rear sprockets, chain-and-sprocket kit, complete swingarm, rear suspension, chain case, chain cover, holder/holding plates, separate bolts, washers, mounting fasteners, lubricants or workshop fitting.

The product should not be mistaken for a two-piece upper/lower slider set. The applicable TVS diagram lists one buffer under this exact reference.

Before ordering – precise fitment checklist

1. Identify whether the motorcycle is an Apache RR310 or Apache RTR310 and confirm the model-specific parts catalogue.
2. Verify the removed slider or official parts diagram shows the exact code N7090090.
3. Compare the original component's curved profile, mounting holes and wear-contact path with the product images.
4. Inspect the buffer holder and two associated screw positions. Do not assume replacement hardware comes in the package.
5. Check whether your motorcycle has an aftermarket swingarm, altered rear suspension or custom chain conversion.
6. Check for any manufacturer supersession or service update applicable to your production year.
7. Inspect the delivered part and its retail label before fitting, especially any cracks, deformation, missing material or transport damage.

Installation guidance for workshops

Installation should follow the model-specific TVS service manual. Access requirements and fastener configurations differ between versions; a trained technician should inspect the drivetrain and swingarm.

1. Make the motorcycle stable with the engine off and inspect chain tension, alignment and wear before dismantling.
2. Gain suitable access to the swingarm slider and remove the worn original, taking care not to damage the mounting surface.
3. Inspect the slider holder and fixing screws for cracks, stripped threads or damage. Replace other components only if needed and with the correct references.
4. Compare N7090090 to the original shape and align it with the swingarm's designed guide path.
5. Fit and tighten according to the motorcycle's workshop torque and fastening instructions. No unverified torque figure is provided here.
6. Check that the chain travels freely, that there is no improper contact or interference, and that suspension motion does not cause an unsafe chain path.
7. Recheck chain slack, wheel alignment, sprocket condition and all disturbed fasteners before road use.

Safety note: Never operate the engine with the motorcycle supported insecurely or place hands near a moving chain. If the swingarm is scored or the drive chain is damaged, have the complete drive system inspected before riding.

Aftercare and inspection

Inspect the chain slider during routine chain cleaning, lubrication and adjustment. Look for grooves, cracks, mounting movement and areas where the chain may be contacting the swingarm. Keep the slider and chain-contact area free of accumulated debris. Use the motorcycle manufacturer's specified chain care and alignment procedures.

There is no verified fixed service-life figure for N7090090. Service life varies with chain condition, riding environment, suspension use and maintenance.

Original TVS reference and authenticity

N7090090 is an original TVS part number documented in model-specific RR310 and RTR310 parts diagrams and offered by a TVS Motor official parts store. The actual retail unit's genuine-stock status, label and packaging should be inspected on receipt. This listing does not assert an unverified material grade, barcode, manufacturing origin, dimensions or warranty period.

Frequently asked questions about TVS N7090090

Search terms customers use

TVS Apache RR310 chain slider, Apache RR 310 buffer chain, Apache RTR310 chain guide, Apache RTR 310 chain slider, RR310 swingarm slipper, TVS N7090090, N 7090090, chain rubbing pad RR310, rear swingarm chain protector, chain buffer 310, TVS genuine chain slider, Apache 310 chain contact pad.

Product summary: N7090090 | Buffer Chain / Swingarm Slider | TVS Apache RR310 & RTR310 (verified catalogue applications) | 1 piece | Related holders and screws sold separately.