TVS Apache Rear Brake Pedal Rubber Sleeve N9112000 – RTR 160, 180, 200 & RR310

TVS Apache Rear Brake Pedal Rubber Sleeve / Foot Brake Tip Cover – N9112000

Small replacement rubber cover for the rider-operated rear foot brake pedal on catalogue-matched TVS Apache RTR 160, RTR 180, RTR 200 4V and Apache RR310 motorcycles.

The TVS N9112000 is the rubber sleeve fitted over the contact tip of the rear foot-brake pedal. It replaces a missing, worn, cracked or damaged rubber foot-contact cover without requiring the buyer to order the complete metal brake pedal when only the sleeve needs attention. Its outer surface has a raised textured pattern in the original-part reference photograph.

Critical product check: N9112000 is NOT the complete brake pedal N9112010, brake pedal pivot shaft, internal bearing/bush, rear brake master cylinder, brake shoe or disc pad. The listing is for one rubber sleeve only.

Quick product specifications

What exactly does this rubber sleeve do?

The rubber sleeve provides the contact surface at the tip of the rear foot brake pedal where the rider places their footwear. Its purpose is different from the mechanical pedal itself: the metal brake pedal and its linkage transmit the rider’s input to the braking mechanism, while the rubber sleeve covers the foot-contact portion of that pedal.

This is a straightforward replacement when the original pedal rubber has worn away, split, become loose or gone missing. A new rubber sleeve does not repair a bent pedal, seized pivot, damaged rear brake master cylinder, worn brake pads or poorly adjusted drum-brake linkage.

Exact motorcycle application and important restrictions

Model-generation warning: Older TVS catalogues and selected 2022 parts listings document this SKU on various Apache families. That does not establish fitment for every BS4, BS6, OBD, newer-generation, special-edition or modified motorcycle. Verify the exact N9112000 reference and compare the original brake-pedal contact tip before ordering.

Position: This sleeve fits the right-side, foot-operated rear brake pedal on compatible motorcycles. It is not the left gear pedal rubber, not the rider footpeg grip, and not a front-hand-lever cover.

N9112000 versus the similar-looking parts

If the metal foot-brake pedal itself is bent or broken, review the separately sold TVS N9112010 rear brake pedal assembly and confirm the required model-specific fitment.

Why buy the correct sleeve instead of a universal rubber?

• Exact catalogue reference: N9112000 is a defined TVS spare-part number, which makes it easier to match a replacement accurately.
• Correct component selection: Avoid buying the full brake pedal when only the removable contact rubber requires replacement.
• Defined mounting location: Intended for the rear foot-brake pedal tip, not a rider footpeg, gear shifter or generic rubber grip.
• Better fitment control: Checking the original contact-tip shape reduces the chance of a loose or incorrect-fitting cover.
• Practical servicing: A small service part that should be checked during routine inspection of rider controls and brakes.

What is included?

1 × Rear Brake Pedal Rubber Sleeve – N9112000

Not included: complete brake pedal, footrest, pivot shaft, pivot bush, brake return spring, brake switch, rear brake master cylinder, brake rod, caliper, brake pads, brake shoes, bolts, screws, mounting tools or workshop installation.

Before-you-order checklist

1. Identify your exact TVS motorcycle model, model year and brake-pedal design.
2. Find N9112000 in your model-specific TVS parts catalogue or on the original parts information.
3. Compare the original brake-pedal tip and the replacement sleeve opening/shape; do not order by engine size alone.
4. Confirm you need only the rubber end cover, not the complete N9112010 pedal assembly.
5. If the original pedal is bent, loose, obstructed or not returning, have the complete rear-brake mechanism checked before riding.

Installation and safety guidance

The replacement rubber must sit securely on the correct pedal contact tip. Inspect the pedal for deformation, excessive wear, sharp edges or corrosion, clean the contact area, and follow the applicable TVS service procedure. Do not cut, heat, glue, force or modify an incompatible cover to make it fit.

After fitting, check that the sleeve stays firmly in place, the rear brake pedal moves and returns freely, the brake light operates correctly, and the rear brake engages and releases normally. A loose or damaged contact rubber should be corrected before the motorcycle is used.

Safety notice: This item is a pedal-contact rubber, not a repair for a malfunctioning brake. If the rear brake is binding, dragging, failing to stop properly or not releasing, arrange a qualified brake-system inspection.

Care and maintenance

Keep the contact surface clean of excess oil, grease and slippery residues. Periodically inspect for cracks, looseness or wear, especially after riding in heavy rain, dust or mud. Replace the sleeve if it is no longer retained properly on the pedal tip.

TVS OEM reference and genuine-part clarification

Part number N9112000 is documented in TVS motorcycle spare-parts catalogues as “Sleeve Brake Pedal”. Product authenticity is determined by the actual supplied retail packaging and manufacturer markings. The part number should not be confused with an aftermarket universal rubber or with the separately catalogued metal brake-pedal assembly.

Frequently asked questions

What is TVS N9112000?

It is the rubber sleeve or cover fitted over the foot-operated rear brake pedal tip in specified TVS motorcycle assemblies.

Is this the complete rear brake pedal?

No. This product is only the rubber sleeve. The separate brake pedal assembly is catalogued as N9112010 in the applicable Apache assemblies.

Is N9112000 a brake pedal shaft or pivot bush?

No. Although TVS calls it a sleeve, this item is the outer rubber cover on the rider-contact part of the pedal, not the pivot shaft or internal bush.

Which side does this part fit?

It belongs to the rider's right-hand foot-operated rear brake pedal, not the left-hand gear-shift pedal.

Does it fit Apache RTR 160 2V?

It is listed in TVS RTR 160 2V parts references. Match the original pedal-tip profile and the exact catalogue part number before ordering.

Does it fit Apache RTR 180?

It appears in older RTR 180 parts catalogues and selected later references. The original brake-pedal tip should be checked.

Does it fit Apache RTR 160 4V?

A 2022 XConnect parts reference lists this part. That does not prove compatibility with every later 160 4V variant.

Does it fit Apache RTR 200 4V?

Yes for catalogue-matched 200 4V configurations, including documented carburettor and EFI applications. Compare the old sleeve.

Does it fit Apache RR310?

It is listed in the RR310 2018 and 2020 Edition parts catalogue and a 2022 parts reference. Verify your own production-year specification.

Can I use it on a 2025 or 2026 Apache?

Only if that motorcycle's exact TVS parts catalogue identifies N9112000. Newer models should not be assumed compatible solely from the Apache name.

Is this a front brake lever rubber?

No. It belongs to the foot-operated rear brake pedal, not the front hand-brake lever.

Is it a rubber cover or metal component?

It is the rubber outer brake-pedal sleeve, not the metal brake lever, pivot or linkage.

How many pieces are supplied?

One sleeve per order quantity of one.

Are mounting bolts or screws included?

No separate bolts, screws, pedal assembly or other hardware are listed as included.

Will this fix a rear brake that is not working?

Not by itself. It replaces a missing, worn or damaged pedal-contact rubber. Poor rear braking may result from adjustment, hydraulics, pads/shoes, caliper, master cylinder or linkage faults and requires diagnosis.

Will the rubber sleeve slip off while riding?

It must fit the correct pedal tip securely. Do not ride if the sleeve is loose, split or interferes with normal operation.

Does it fit the gear lever?

No. A gear-shift pedal or footpeg rubber may be different; use the correct part number.

Can I buy the full brake pedal assembly?

The relevant Apache catalogue identifies N9112010 as the separate full rear brake pedal assembly. Check the matching vehicle application before ordering that item.

Is this TVS Genuine?

N9112000 is a documented TVS OEM part number. Retail-pack genuineness should be verified from the actual TVS packaging supplied for the order.

What is the current MRP?

The final MRP is the amount printed on the actual current retail pack. Older TVS price-list values should not be treated as a guaranteed current MRP.

Common names and buyer search terminology

TVS N9112000, N 9112000, TVS Apache rear brake pedal rubber, Apache RTR 160 brake pedal rubber, Apache RTR 180 foot brake sleeve, Apache RTR 200 brake pedal cover, Apache RR310 foot brake rubber, rear foot brake rubber grip, motorcycle brake pedal tip cover, brake pedal toe rubber, foot brake sleeve, Apache brake pedal contact rubber.

Part number: N9112000 | Position: right-hand rear foot brake pedal | Quantity: one rubber sleeve