TVS Apache RTR 160/180 Rear Fender Flap / Mudflap – N9222010

TVS Apache RTR 160 / 180 Rear Fender Flap / Mudflap – N9222010

TVS N9222010 is the separately replaceable rear fender flap (rear mudflap / splash flap) for specific Apache RTR 160 2V and RTR 180 2V rear-fender assemblies. In TVS parts diagrams it is identified as FLAP REAR FENDER, quantity one. It is the flap section of the rear mudguard assembly, not the entire rear mudguard.

When the original flap becomes broken, cracked, detached or damaged at its fixing points, the correct part-number replacement may restore the intended rear-fender arrangement without buying a complete fender—provided the fender and mounting points remain usable.

IMPORTANT FITMENT WARNING: N9222010 appears in both older Apache RTR 180 and certain later Refresh / RTR 160 2V parts references, but TVS specifically warns that the RTR 180 flap introduced with the new fender was not interchangeable with the previous RTR 160 configuration. Do not order for every motorcycle named Apache RTR 160 or RTR 180. Compare the original part number and rear-fender shape first.

Quick product specifications

Motorcycle compatibility – verify the actual rear fender

Buyer tip: Some sellers group “RTR 160 / 180 2V” together, but the correct decision depends on the actual rear-fender generation. The specific TVS parts diagrams and original component should take priority over a broad retailer compatibility tag.

N9222010 versus N9222000 and N9223890: the difference

In particular, N9222000 and N9223890 refer to different main rear-fender generations. The fact that some catalogues list N9222010 with both does not establish compatibility with every Apache fender ever produced.

What does the rear fender flap do?

The flap is an extension of the rear mudguard assembly. It sits in the rear-wheel splash area and helps limit mud, water and road debris being thrown onto the motorcycle’s tail area and following traffic. It is part of the manufacturer-designed rear-body arrangement.

A missing or loose flap may allow more spray, vibration or contact with adjacent components. However, no specific percentage reduction in spray, extra aerodynamic benefit or guaranteed protection level is claimed for this spare part.

When should the flap be inspected or replaced?

• The original flap is cracked, split, broken, distorted or missing.
• Its attachment holes or retaining points have become damaged and cannot hold it securely.
• The flap rattles or hangs loose after an impact or after servicing.
• The rear wheel, chain, suspension or nearby parts show signs of unintended contact with loose rear-fender components.
• The main rear mudguard and its mounting bracket have been inspected and remain suitable for reuse.

A damaged flap can be a symptom of a broken main fender or support bracket. Identify the full cause before purchasing only the flap.

Package contents – exactly what you receive

1 × TVS rear fender flap / mudflap – Part N9222010.

The following are not supplied as separate items: complete rear fender N9222000 or N9223890, mounting bracket N9222040, rear number-plate assembly or lamp, licence-plate holder, tail-lamp assembly, mounting bolts/nuts/washers/clips, tools or installation service. Any pre-attached fixtures on the physical retail item should be checked against the actual package; no extra hardware is promised here.

Before ordering – five checks that prevent wrong-part purchases

• 1. Check the exact SKU: verify N9222010 in the motorcycle-specific parts reference, existing component or mechanic’s parts lookup.
• 2. Check the fender generation: identify whether the motorcycle has the earlier RTR 180 N9222000 assembly, later N9223890 Refresh assembly or another design.
• 3. Compare the flap: inspect physical profile, fixing holes and position against the original component.
• 4. Inspect the bracket and fasteners: a broken bracket or stripped mount can prevent a new flap fitting securely.
• 5. Inspect prior modifications: aftermarket tail tidies, cut-down fenders and custom number-plate carriers can change the mounting arrangement.

Installation guidance

The motorcycle should be supported safely and the rear-fender assembly accessible. Remove the broken flap carefully and inspect its attachment points, adjacent number-plate components and rear-fender bracket.

Compare the replacement against the old part before installing it. Use the fastening method and hardware specified for the exact motorcycle. Do not cut, drill or force a nonmatching flap into position.

After fitting, check that the mudflap is firmly held and cannot rub the rear tyre, chain, suspension, rear brake lines or other moving parts throughout normal suspension movement. Check the security of any adjacent licence-plate or lamp assembly disturbed during removal. A technician should inspect the motorcycle if there is uncertainty.

Care and maintenance

Periodically remove accumulated mud and road grime using water and a mild vehicle-safe cleaner. Inspect the flap and its fixing points after rough-road use or a rear-end impact. Avoid harsh solvents and aggressive cleaning that could damage the part or nearby painted panels.

Replacing a flap should not be used to conceal a bent fender bracket, broken structural mount or unsafe rear-body modification.

TVS OEM reference and authenticity

N9222010 is documented in TVS manufacturer parts catalogues. The part-number reference itself does not verify the authenticity of an individual retail unit. Examine the supplied package and manufacturer label for genuine-stock verification.

Frequently asked questions

1. What is TVS N9222010?

It is the separate rear mudguard flap identified by TVS as FLAP REAR FENDER in specified Apache RTR rear-fender assemblies.

2. Is this the complete Apache rear mudguard?

No. It is only the flap section. The main fender is separately catalogued.

3. Does N9222010 fit an older Apache RTR 180 rear-disc?

The earlier RTR180 rear-disc catalogue lists one N9222010 flap with fender N9222000. Verify the original mounting arrangement.

4. Does it fit an older RTR 180 ABS?

The relevant TVS earlier ABS catalogue lists N9222010. Verify the specific rear-fender configuration.

5. Does it fit Apache RTR 180 Refresh?

Yes, in the catalogue-listed Refresh assembly where the main fender is N9223890. Confirm the original flap and mount.

6. Does it fit Apache RTR 180 ABS Refresh?

The BS4 Refresh/ABS catalogue identifies one N9222010 flap. Match the model-specific rear-body parts.

7. Does this fit Apache RTR 160 2V?

Some RTR160 2V Refresh/reference catalogues list N9222010, including a 2022 parts catalogue. Earlier RTR160 arrangements are not automatically interchangeable.

8. Will it fit every old RTR 160?

No. A TVS RTR180 service note expressly says the RTR180 flap was not interchangeable with the previous RTR160 rear-fender design.

9. Can I fit it on Apache RTR 160 4V?

Fitment under this SKU has not been established for the 4V bodywork.

10. Does it fit Apache RTR 200 4V?

No verified model-specific RTR200 4V application is available for this exact SKU.

11. Is N9222010 the same as N9222000?

No. N9222010 is the separate flap, while N9222000 is an earlier main rear fender.

12. Is N9222010 the same as N9223890?

No. N9223890 is a main rear fender used in Refresh/later rear-body assemblies.

13. Does the flap come with the complete fender?

No. This listing supplies one flap only.

14. Is the rear-fender mounting bracket included?

No. The bracket N9222040 is separately catalogued.

15. Are mounting screws, nuts and washers included?

No separately packaged hardware is promised. Compare the required hardware with the manufacturer assembly diagram.

16. Does it include the number-plate holder?

No. The number-plate brackets and related rear-lighting parts are separate.

17. Does it include a tail light or number-plate lamp?

No. This is a mechanical rear-fender flap, not a lighting component.

18. How many pieces will I receive?

One flap, matching the catalogue quantity for the relevant assemblies.

19. Is the flap black?

The retail appearance should be checked from the physical stock. No exact colour or finish claim is made without pack verification.

20. Is the material rubber or plastic?

The precise composition and grade are not independently verified for this SKU; do not rely on a generic material assumption.

21. Can I install it on an aftermarket tail tidy?

Fitment is not assured because the original attachment points may have been removed or modified.

22. Will a new flap stop every rear-wheel splash?

No. It is an original rear-body splash component, not a guarantee of complete spray prevention.

23. Can I replace the flap without replacing the main fender?

Yes, provided the main fender and all mounting points are sound and the replacement matches the original.

24. What if the flap mounting holes are broken on my fender?

A new flap alone may not fit securely. Inspect whether the main fender, bracket or clips also require replacement.

25. Is the rear mudflap the same as the rear hugger?

Not necessarily. This is the manufacturer-listed flap on the rear-fender assembly, not a universal swingarm-mounted tyre hugger.

26. What if my Apache was made in a different year?

Use the exact VIN/model-specific parts catalogue and original rear-fender design; model year alone is insufficient.

27. Is this a TVS genuine spare-part number?

Yes. N9222010 is documented in TVS parts references. Check manufacturer packaging to establish the actual supplied part’s authenticity.

28. Do I need a mechanic for fitting?

Professional help is recommended if the mounting bracket, number-plate arrangement or tail section must be dismantled.

29. What should I check when the parcel arrives?

Verify N9222010 on the package, quantity one, part shape, attachment points and condition before installation.

30. Which related parts should I inspect at the same time?

Check the main fender N9222000 or N9223890, fender bracket N9222040, front fender-body section N9220480 and the original fixing hardware.

31. Is this fitted at the front wheel?

No. It is part of the rear fender arrangement.

32. What is the current TVS MRP?

The last price-list value verified here is ₹215, dated 2 May 2024. Check the actual current package for the latest printed MRP.

Common buyer search names

TVS N9222010, N 9222010, Apache RTR 180 rear mudflap, Apache RTR 160 2V rear mudguard flap, TVS rear fender flap, RTR 180 back mudguard flap, Apache rear splash flap, Apache 180 fender extension, Apache Refresh rear flap, TVS genuine rear mudflap, flap fender rear RTR 180.

Related parts – sold separately

• Main rear fender for earlier RTR180 assemblies: N9222000 — separate item; verify the vehicle before ordering.
• Rear-fender bracket: N9222040 — view UTH bracket listing.
• Refresh/later rear fender: N9223890 — verify the exact motorcycle and current product before purchasing.

Final purchase check: SKU N9222010 | Rear fender flap only | Quantity 1 piece | Verify exact TVS rear-fender generation and fixing points.