TVS Genuine Magneto Cover Gasket for Apache RTR 160 4V / 200 4V & Ronin 225 – N9030320

TVS Genuine Magneto / Alternator Cover Gasket – N9030320

Looking for the left-side engine cover gasket? TVS N9030320 is the genuine-part reference for GASKET MAGNETO COVER 1, used on manufacturer-catalogue-listed Apache RTR 160 4V, Apache RTR 200 4V and Ronin 225 configurations. This item is a single sealing gasket, not a magneto cover, alternator, stator, rotor or complete gasket kit.

Which TVS engine cover gasket do you need?

Tip: The magneto cover and clutch cover are distinct castings. A part number, photograph of the old gasket/cover and chassis-specific parts catalogue are more reliable than searching only for “Apache engine gasket”.

Product specifications

Motorcycle compatibility — exact catalogue references

Fitment below means the exact part number appears in the named parts catalogues, not that every production batch or global-market bike with that model name uses it. Check your original part number before installation.

What does the gasket do?

The magneto or alternator-side cover closes off part of the engine and protects the components housed beneath it. The N9030320 gasket seals the interface between this left-side cover and the matching engine mating surface. Replacing the correct gasket is a standard consideration when the cover has been opened for inspection or repair, but an oil leak, noise, starting issue or charging fault must be diagnosed independently.

What you receive

1 × magneto-cover sealing gasket — TVS reference N9030320. This is the manufacturer catalogue quantity. The actual retail packet should be checked before dispatch.

Not included: magneto/alternator cover (N9030330 or its model-specific revision), magneto rotor, stator, starter gears, cover screws, locating dowels, TDC plug, breather plug gasket, O-rings, clutch cover gasket N9030250 or any complete gasket set. Separate components appear under distinct codes in the TVS exploded diagrams.

How to confirm the correct gasket before buying

1. Check the side: confirm the repair is for the left-hand magneto/alternator cover, not the right-hand clutch cover.
2. Check the TVS code: locate N9030320 in your exact bike/engine parts catalogue or confirm with an authorised TVS dealer using chassis details.
3. Compare the outline: inspect the complete old gasket and cover mounting holes, perimeter and internal passage cut-outs.
4. Verify the engine version: model name, BS stage and registration year do not always uniquely identify a cover revision.
5. Confirm actual stock: match our package code and gasket shape before dispatch.

Installation and service precautions

• Have a competent motorcycle mechanic follow the correct model-specific TVS workshop manual.
• Inspect both sealing faces for old gasket residue, distortion, cracks or other damage before installing a new gasket.
• Take care around the stator wiring and internal rotating components; the gasket alone does not repair an electrical issue.
• Do not add generic sealant or torque values unless the exact TVS service instructions specify them.
• Confirm correct gasket orientation, bolt sequence, specified tightening torque and any other separately serviced seals.
• After reassembly, check for abnormal leakage and verify safe mechanical/electrical operation as required by the repair.

Why a gasket replacement may be needed

After an engine cover has been removed, the existing gasket may tear, compress unevenly or become damaged. If there is persistent oil staining or seepage near the left engine cover, inspect the cover, wiring-grommet seals, fasteners and adjacent sources as well. Buying the gasket alone cannot guarantee that every leak will be resolved.

Related TVS references — not interchangeable

Frequently asked questions

1. What is the exact TVS part number?

N9030320, called GASKET MAGNETO COVER 1 in the TVS parts and price references.

2. What is a magneto-cover gasket?

It is the sealing gasket between the engine crankcase and the magneto/alternator-side cover of the engine.

3. Which side of the motorcycle does this gasket fit?

The left-hand (LH) engine cover, as seen from a normal seated riding position. This is not the right-side clutch-cover gasket.

4. Is N9030320 the same as N9030250?

No. N9030320 is the magneto-cover gasket on the left. N9030250 is the separate clutch-cover gasket on the right. They cannot be substituted.

5. Does it fit the Apache RTR 160 4V?

Yes, the code appears in specified TVS RTR 160 4V carburettor, FI and documented BS6/ride-mode magneto assemblies. Check the exact model revision before purchase.

6. Will it fit every Apache RTR 160 4V production year?

That is not guaranteed. TVS may revise components by production and market. Verify N9030320 through the correct chassis/parts catalogue.

7. Does it fit the Apache RTR 200 4V?

The exact code appears in manufacturer parts references for documented RTR 200 4V carburettor, FI and FI BS6 magneto assemblies. Confirm the specific version.

8. Does it fit the Apache RTR 200 4V BS6 FI?

Yes, the relevant TVS Fi-BS VI parts catalogue explicitly lists N9030320 as the magneto cover gasket.

9. Will it fit the TVS Ronin 225?

Yes, the TVS Ronin 225 ABS parts catalogue lists N9030320 in its cover magneto assembly. Check the correct current chassis-specific reference.

10. Does the same gasket fit Apache RTR 160 2V or RTR 180?

We have not verified those models for N9030320. Do not purchase solely based on a general Apache name.

11. Does it fit the Raider 125?

No validated exact-code fitment was found for Raider 125, so we do not advertise it for that motorcycle.

12. Does this include the magneto cover?

No. The gasket is separate from the rigid cover/housing. The magneto cover is another part number in TVS catalogues.

13. Does this include the stator or magneto rotor?

No. Electrical stator, flywheel/rotor and internal assemblies are listed as separate parts.

14. Is the clutch cover gasket included?

No. The clutch cover uses a different gasket, TVS N9030250, and it is not included.

15. How many gaskets do I receive?

One magneto-cover gasket is the catalogue quantity; the actual packaging should be verified before dispatch.

16. Are bolts or O-rings included?

No bolts, plugs, O-rings or additional seals are promised. The assembly diagrams list separate fasteners and related seals.

17. Are there different gaskets on each side of the engine?

Yes. The magneto or alternator side and clutch side have distinct cover assemblies and gasket outlines. Choose based on the side and part number.

18. Can I identify fitment using only the model name?

No. Use the original part number, cover/gasket shape and the correct manufacturer parts catalogue for the chassis.

19. What should I compare on the old gasket?

The original part reference where available, full outline, locating holes, fixing positions, sealing passages and the matching cover casting.

20. Can I reuse the old gasket?

The decision belongs to the model-specific TVS workshop procedure. A disturbed or damaged gasket can fail to seal; a technician should inspect sealing surfaces and follow the manual.

21. Is gasket sealant required?

Follow the precise TVS workshop instructions for the engine revision. We do not prescribe an aftermarket sealant or quantity without that instruction.

22. Why is oil leaking near my engine cover?

Leakage can involve a damaged gasket, loose or incorrect fasteners, damaged cover surfaces, other seals or sources higher on the engine. Proper diagnosis is needed before buying a part.

23. Will this gasket stop every oil leak?

No. It can only seal its designated interface when correctly specified and installed. Other leaks must be diagnosed separately.

24. What torque should I use on the magneto cover bolts?

Use the exact TVS service manual for the motorcycle and cover hardware; no unverified generic torque specification is provided.

25. Is this a TVS genuine spare part?

N9030320 is an original TVS part-number reference. Confirm the actual manufacturer packaging and item before dispatch or installation.

26. Does the historical ₹80 MRP apply today?

Not necessarily. ₹80 comes from a 2 May 2024 TVS price-list reference. The current printed packet MRP and selling price need verification.

Buyer search terms / related names

Apache RTR 160 4V magneto cover gasket, RTR 200 4V magnet packing, Ronin 225 magnet gasket, N9030320 TVS original gasket, Apache left engine cover packing, alternator case cover gasket, magneto side packing TVS Apache, stator cover gasket, TVS LH gasket.

TVS Part No. N9030320 | LH Magneto / Alternator Cover | 1 Gasket | Verify exact bike revision. For the opposite right-hand engine cover, see TVS N9030250 clutch-cover gasket.