TVS Apache RTR 310 Rear Right Indicator / Turn Signal Lamp RH – N7225270

Replacement rear-right turn indicator for the TVS Apache RTR 310 application shown in model-specific parts catalogues.

The TVS N7225270 turn-signal lamp is listed as the right-hand indicator in TVS spare-parts records. In the Apache RTR 310 rear-indicator parts diagram, this exact reference appears as the rear right-hand (RH) turn-signal lamp, fitted at the rear hugger / licence-plate-support region. This is a one-side replacement item for a matching original lamp, not a pair or a complete lighting kit.

Before ordering: A general TVS parts list calls N7225270 “Turn Signal Lamp FR RH U400”, whereas two model-specific Apache RTR 310 parts diagrams label it “rear right” and depict it on the rear hugger. We use the latter location for this RTR 310 listing. Verify the old part number, physical lamp, electrical connector and mounting before ordering; do not assume universal front/right fitment.

Product specifications

Exact motorcycle compatibility and fitment

The application below follows two dedicated Apache RTR 310 parts catalogues, including an October 2024 revision. Because TVS also has variant-specific and later part references, fitment is determined by matching the exact original item, not just model name.

Fitment note: The primary model-specific catalogue source is the Apache RTR 310 Parts Catalogue, Figure 24 (“Rear Directional”), with a second October 2024 revision corroborating the same rear-right assignment. The general TVS list uses “FR RH U400”; that conflict is disclosed rather than ignored.

Key part-number differences

A customer needing the opposite side should order the correct LH reference, not rotate or refit the RH lamp. Likewise a sequential indicator or front indicator should not be substituted without an identical official part number and matching electrical arrangement.

What does this indicator do?

The rear right-hand indicator signals a turn or lane-change intention to road users behind the motorcycle. Correct placement and operation are essential for visibility and safe signalling.

If a turn signal is not operating, the cause may be inside the lamp, connector, harness, switch, relay/driver or other electrical components. Replacing the indicator should follow basic diagnosis.

Why the exact N7225270 reference matters

RH identification: the part number identifies the right-hand lamp rather than the opposite-side assembly.

Vehicle-specific evidence: the RTR 310 parts diagram depicts it beside the rear hugger; this is a stronger location reference for that model than an undifferentiated master-part list.

Independent service replacement: a damaged indicator can be replaced without automatically buying the left indicator, bracket, hugger or licence-plate lamp.

Electrical fitment protection: the connector type, lamp technology and wiring must match the motorcycle; catalogues alone do not confirm every detail for all generations.

Lamp versus other rear lighting

This indicator is different from the rear brake/tail lamp, number-plate illuminator, rear reflector and front indicator. Replacing this one component will not cure faults in those other lighting systems.

The product should not be marketed as an LED upgrade kit, sequential conversion kit or universal indicator; those specifications are not proven for N7225270.

Manufacturer MRP and current price

A TVS spare-parts price list dated 2 May 2024 identifies N7225270 as TURN SIGNAL LAMP RH with MRP ₹725 and HSN 85122010. This is historical reference information only.

The actual current printed MRP, procurement cost and any present-day retail competitor price for this exact SKU need confirmation. A selling price has therefore not been assumed.

Appearance and package inspection

Before fulfilling an order, compare the supplied unit to the actual N7225270 retail packaging and inspect the lamp housing, lens, mounting stem and electrical lead for damage.

Where the unit contains an integrated light source or connector, only the actual stock inspection can establish its exact construction and included accessories.

What you receive

1 × TVS right-hand turn-signal lamp, part number N7225270.

Not included as separate components: Left-side indicator, front indicator, tail lamp, rear hugger, number-plate lamp, replacement switch/relay, additional brackets, nuts, wiring harnesses and independent installation accessories unless physically supplied in the labelled retail pack.

Before purchasing – fitment checklist

1. Read the original indicator part number and confirm N7225270, without altering any suffix or swapping the LH code.
2. Identify the required location. On the dedicated RTR 310 diagrams N7225270 appears at the rear right; do not assume it is the front indicator.
3. Match the existing lamp housing, lens, connector, wire length and mounting stem to the replacement.
4. Check whether your motorcycle has standard or sequential turn-signal hardware and the corresponding part reference.
5. Inspect the rear bracket and fasteners; these may require separate replacement.
6. Compare packaging and visually inspect the delivered lamp before connecting it electrically.

Installation and safety guidance

Electrical installation should be completed with the motorcycle ignition off, following the model-specific TVS workshop manual. Do not damage the harness or splice incompatible connectors merely to force installation.

Remove the defective indicator from its original mounting location, retain serviceable manufacturer-specified hardware where permitted, and compare the replacement before fitting.

Secure the lamp in its intended orientation and check wire routing for adequate clearance from rear-wheel movement, mudguard flex and surrounding components.

After installation, confirm right-hand signalling, correct flashing behaviour, safe cable routing and secure mounting. If the indicator does not work correctly, diagnose the wiring and control system before riding.

Troubleshooting and inspection

• Right-hand rear indicator not illuminating: inspect the original lamp, connector and associated wiring.
• Abnormally fast or slow flashing: inspect other indicator lamps and the motorcycle’s lighting control system.
• Physical damage from a fall: verify bracket and mounting area as well as the lamp.
• Intermittent signal: inspect connectors, corrosion, cable strain and electrical continuity.
• Incorrect colour or signalling pattern: verify the exact OEM reference rather than using a lookalike lamp.

Service warning: A non-functioning or incorrectly installed direction indicator can affect road safety. Have an appropriate technician inspect electrical faults and confirm correct operation before riding.

Frequently asked questions

1. What is TVS N7225270?

It is a right-hand turn-signal lamp reference. The Apache RTR 310 specific rear-indicator catalogue positions it at the rear right.

2. Does it fit Apache RTR 310?

It is listed in RTR 310 model-specific parts catalogues. Verify the original lamp part number and electrical connector.

3. Is N7225270 for front or rear?

The dedicated Apache RTR 310 Figure 24 places it at rear right. A general TVS master list instead calls it front right; confirm your exact motorcycle and original component.

4. Why is there a front/rear discrepancy?

A generic TVS part description and model-specific catalogue use different position labels. The model-specific exploded diagram is the basis for this RTR 310 listing.

5. What does RH mean?

Right-hand side while seated on the motorcycle facing forward.

6. What is the matching left-side part?

N7225260 is the matching left-hand turn signal in the cited RTR 310 rear-hugger diagram.

7. Does the pack include two indicators?

No. One RH lamp assembly.

8. Does it include the LH indicator?

No. The left unit is separately catalogued.

9. Does it fit Apache RR310?

RR310 fitment is not established from the cited RTR 310 catalogue.

10. Does it fit Apache RTR 200 4V?

Compatibility is not confirmed.

11. Is the lamp sequential?

The sequential function of N7225270 is not verified. Separate TVS sequential-indicator part codes exist.

12. Is it definitely LED?

The exact light-source construction of this SKU is not confirmed by the consulted parts listing.

13. Does it come with a bulb?

The manufacturer’s catalogue does not independently confirm a loose bulb or serviceable bulb in the retail pack.

14. Does it include a mounting nut?

No separate mounting hardware is guaranteed.

15. Is the rear hugger included?

No. The rear hugger is a different component.

16. Is the number-plate light included?

No. The LED plate lamp N7224410 is separately listed.

17. Can it be fitted to the front right?

Do not assume this from the general master list; verify the original front-lamp part number and wiring.

18. Can I use an aftermarket sequential light instead?

That would be a different product requiring independent compatibility and electrical checks.

19. How many pieces are supplied?

One RH indicator lamp assembly.

20. What is the MRP?

The historical TVS price list dated May 2024 shows ₹725. Check the current physical package for today’s MRP.

21. Is it a genuine TVS part?

N7225270 is a TVS catalogue reference. Genuine status of an individual retail unit should be checked from its packaging.

22. Can an indicator stop working due to a fuse?

Yes, an electrical-system problem can cause the symptom. Inspect the relevant circuit before replacing parts.

23. Will it fix rapid indicator flashing?

Only if the defective lamp is the actual cause. The circuit and other lamps may require diagnosis.

24. Does it include the connector and harness?

The exact supplied cable and connector must be checked on the physical unit; no separate full wiring harness is included.

25. What do I check before ordering?

Confirm N7225270 on the original part or matching parts diagram; check side, position, connector and mounting.

26. What if my part number is N7225250?

Do not substitute N7225270 automatically; N7225250 is a separately listed RH sequential signal.

27. Can I return it after wiring it to the motorcycle?

Check UTH’s current electrical-parts return policy and confirm fitment before opening or electrically installing the part.

28. Should I have a mechanic install it?

Professional installation is advisable when electrical connectors or mounting hardware need inspection.

Other names customers search for

TVS N7225270, TVS Apache RTR 310 right indicator, Apache RTR 310 rear right turn signal, RTR310 RH rear indicator assembly, TVS rear right blinker, Apache RTR310 indicator replacement, RTR 310 indicator light, Apache RTR 310 signal lamp RH, TVS genuine indicator spare part.

TVS part number: N7225270   |   Quantity: 1   |   Application: RTR 310 model-specific rear RH indicator