TVS RH Handlebar Switch Top Version for Select Apache 160 4V / 200 4V – NF161150

TVS Right Handlebar Switch – Top Version NF161150 (selected Apache RTR 4V variants)

Need a right-side switchgear assembly for your TVS Apache? This listing identifies TVS manufacturer part number NF161150, described in the TVS price list as SWITCH ASSY R TOP VERSION. It is a right-hand (RH) electrical handlebar control switch, not a left-hand switch, full wiring harness, throttle assembly, or replacement for every Apache RH switch.

CRITICAL FITMENT NOTICE: NOT A UNIVERSAL APACHE SWITCH. Even motorcycles called Apache RTR 160 4V BS6 or RTR 200 4V BS6 can use different right-hand switch part numbers. TVS lists NF160350, NF161150, NR160100 and other variants for particular configurations. Verify the original part number and all electrical connectors before ordering. A different ABS or ride-mode revision can require a different switch.

We have not been supplied a photo of the actual NF161150 retail stock. Exact button functions, physical connectors, authenticity markings, price and included loose fittings still require inspection of the unit that will be dispatched. The technical fitment references below are for the TVS part number, not a guarantee that any uninspected item or vehicle is a match.

Product identification

Model and variant compatibility — read before buying

Variant matters more than model name. “4V”, “BS6”, “FI”, “Ride Mode”, “1CH” and “2CH” are not interchangeable descriptions. A later model can also change the wiring or switch control layout without an obvious change in external shape.

Connector matching — most important physical check

Uno Minda’s SW-0580AA-M01 aftermarket cross-reference to TVS NF161150 documents the following connector arrangement. This is an aftermarket reference, not a verified photograph or electrical pinout of the genuine TVS item in stock:

• One black single-pin male connector
• One black six-pin male connector
• One red two-pin male connector
• Two short wires, as described in the catalogue

By contrast, the Uno Minda reference corresponding to TVS NF160350 lists a black single-pin male connector, a black six-pin male connector, and two short wires; it does not list the extra red two-pin connector. These data are powerful screening checks but are NOT substitutes for the actual stock photos, connector keying, terminal orientation and a VIN-verified TVS parts reference.

Do not cut, rewire, splice, repin or adapt the motorcycle loom to force this switch to fit. A control block with similar external appearance can be electrically incompatible.

Pre-purchase matching checklist

• Read the original switch part number where marked; request a TVS dealer’s chassis/VIN-based lookup if no marking is visible.
• Confirm motorcycle: RTR 160 4V or RTR 200 4V, generation, build year and exact variant.
• Identify riding-mode availability, instrument-cluster variant and ABS channel configuration if applicable.
• Photograph the full right-hand switch housing from the rider side: all visible buttons and red/black control positions.
• Photograph every detached wiring connector face-on so both pin count and pin layout are visible.
• Check connector shape, colour, terminal gender, lock tab, number of wires, and lead lengths.
• If the existing switch reads NF160350, NR160100, N9162210, N9162870 or a different code, do not assume NF161150 is a replacement.
• Confirm the physical TVS stock label and photographed actual unit match the SKU NF161150 before payment.

Buyer search names — same part, not interchangeable parts

Customers may search for “Apache 160 4V right-hand switch”, “Apache RTR 200 ride-mode switch”, “TVS Apache self-start switch assembly”, “Apache RHS switchgear”, “Apache handle switch”, “Apache engine-kill switch housing” or “right-side handlebar control”. These are search phrases for this RH switch category, not confirmation that a particular starter, mode or kill-switch button is present on a specific unit.

How this RH handlebar control differs from other TVS parts

What is included and excluded

• Included: one complete right-hand handlebar switch assembly bearing the confirmed NF161150 stock part number and its inseparable attached leads/connectors (if physically attached).
• Not included: separate LH switch, handlebar, throttle grip or cable, front brake lever, brake master cylinder, steering lock, complete bike harness or special adaptor wiring.
• Loose mounting screws, clamps or other hardware are not promised unless explicitly photographed as present inside the actual product package.
• Any Under The Hood keychain, display prop or generic reference photograph is not part of the product.

Fault diagnosis before buying

Intermittent switch operation, a broken starter button, a failed mode selector or a loose switch housing might justify inspection. However, a battery fault, fuse, starter relay, side-stand or clutch interlock, connector corrosion, broken loom or ECU issue can produce similar symptoms. Confirm the cause through basic electrical diagnosis before replacing the switch.

Installation and safety guidance

• Use a qualified mechanic or automotive electrician familiar with the particular Apache wiring revision.
• Check the part code, all connectors and control layout before removing any packaging seals or fitting.
• Switch off the ignition and follow TVS-approved battery-disconnection procedures for work on the circuit.
• Route the wiring exactly as originally installed, keeping it clear of steering stops and moving/hot components.
• Do not force mismatched couplers, repin them, or bypass any starting/engine-stop safety functions.
• Check the correct function of every actual control after fitting, then check full steering travel and loom clearance.
• If any electrical behaviour differs, stop and verify against the TVS wiring diagram before further use.

Frequently asked questions

What is TVS NF161150?

TVS part NF161150 is listed as SWITCH ASSY R TOP VERSION, a right-hand handlebar electrical switch assembly for selected Apache variants.

Does NF161150 fit every Apache RTR 160 4V BS6?

No. TVS-related references list NF160350 for other BS6 configurations. Later ride-mode models can use NR160100. Confirm original switch code and couplers.

Which RTR 160 4V versions may use NF161150?

Certain catalogue-listed earlier BS6 top-version/ride-mode configurations. Model name alone is insufficient; use VIN-based TVS parts confirmation.

Does NF161150 fit a 2025 RTR 160 4V with ride modes?

Do not assume so. A later catalogue lists NR160100 for ride-mode variants and NR161380 for some 2CH USD/TFT configurations.

Does it fit every Apache RTR 200 4V BS6 FI?

No. An earlier TVS FI BS6 parts catalogue lists NF161150, but other variant-grouped catalogues show alternative right-hand switch part numbers.

Does it fit RTR 200 4V Ride Mode single-channel ABS?

A catalogue identifies NF161150 as RH TOP VERSION 1CH RIDE. The actual VIN, wiring and connectors still need to match.

Does it fit RTR 200 4V Ride Mode dual-channel ABS?

Do not assume this. A variant-specific catalogue lists NR160100 for 2CH RIDE rather than NF161150.

What if my old right-hand switch is NF160350?

Do not order NF161150 without a documented TVS supersession. These are separately catalogued and the reference connector arrangements differ.

What if my old switch is NR160100?

Treat it as a different part. TVS variant-specific catalogues list NR160100 separately; confirm any interchange only from an official VIN-specific parts reference.

What connectors are associated with NF161150?

An Uno Minda aftermarket cross-reference lists black 1-pin male, black 6-pin male and red 2-pin male couplers plus two short wires. This must be checked on the actual genuine TVS item.

Is the red 2-pin connector important?

Yes. It is a significant difference from the NF160350 aftermarket reference and could signal a different electrical configuration. Confirm keying and pin assignments too.

Does NF161150 have a ride-mode button?

The top-version/ride-mode references suggest that use in certain applications, but the exact supplied button layout has not been inspected. Verify product photos before buying.

Does it include the starter button?

Do not assume specific controls from a part number alone. Verify the visible buttons on the exact physical stock and the motorcycle.

Does it include an engine kill switch?

The exact physical unit needs inspection. Related variants differ; no universal guarantee is made for an unseen stock item.

Is this an original TVS Genuine spare part?

NF161150 is a TVS original parts-catalogue code. The authenticity of a specific retail item requires TVS Genuine packaging, a matching label and a physical stock check.

Is the Uno Minda SW-0580AA-M01 switch the same item?

It is an aftermarket-brand product cross-referenced to the TVS code, not proof that the two are identical in every detail or that a TVS packet contains Uno Minda stock.

Can an RH switch for Apache RTR 180 work?

NF161150 has no confirmed application there; do not buy it on a generic Apache label.

Can I splice the wires to make the switch fit?

No. Do not adapt a mismatched connector or electrical pinout to force fitment. Use the correct part for the original wiring.

What photographs should I send to verify fitment?

Send your exact model/variant, build year, existing RH control face, every connector and its pin holes, old part number, and if available a dealer-confirmed chassis-based parts reference.

Does this include the left handle switch, brake lever or throttle grip?

No. It is only the right-hand switch assembly. Other handlebar components are separate.

What is the latest price or MRP of NF161150?

A dated TVS price list from 2 May 2024 shows ₹1,071. That is historical and is not a confirmed current MRP on physical stock. Confirm before purchase.

Can I return this after installing it?

Check the store’s current electrical-parts return conditions. Verify the part and connector match before opening or installation; installation may affect return eligibility.

What if my switch looks identical from the front?

Appearance alone is not enough. Confirm code, button layout, wiring connectors, pin count, lock tabs, cable route and VIN-specific variant.

How can I avoid ordering the wrong switch?

Match the original TVS part number and the full electrical connection layout; if in doubt, arrange a TVS chassis/VIN lookup instead of relying on engine capacity or BS6 status.

Important purchase confirmation

Before payment: Confirm the motorcycle model + revision and the old part number. A buyer who only knows “Apache 160 4V BS6” or “Apache 200 4V BS6” must not treat NF161150 as automatically compatible. When the old code cannot be read, confirm a TVS VIN-based parts lookup together with photographs of the actual switch and plugs.

This listing is a fitment-controlled draft until the actual product stock has been photographed and its TVS Genuine label, exact NF161150 code, connectors and button positions have been checked. No warranty period, electrical life, water resistance rating, tax rate or unverified specific control function is claimed.