Skip to product information
1 of 3

TVS Motor Company

TVS Ronin 225 Front Brake Lever Matte Black Genuine | NR3203005D

TVS Ronin 225 Front Brake Lever Matte Black Genuine | NR3203005D

Regular price Rs. 180.00
Regular price Rs. 183.00 Sale price Rs. 180.00
Sale Sold out
Shipping calculated at checkout.
Non-cancellable Non-returnable

Please confirm the part number and compatibility before ordering.

Important — Please verify before ordering Confirm the part number, model and compatibility before purchase. Orders are subject to our cancellation and return policy. A continuous unboxing video is required for shortage, incorrect-item and damage claims. Read full Return, Cancellation & Warranty Policy

TVS Ronin 225 Genuine Front Brake Lever – Matte Black – NR3203005D

Replace a bent, broken or damaged front brake lever on the applicable TVS Ronin 225 with the genuine TVS matte-black lever supplied under part number NR3203005D. TVS parts catalogues identify NR3203005D as BRAKE LEVER MAT. BLACK and place it in the Ronin front disc-brake/master-cylinder assembly.

This is the part buyers commonly search for as a TVS Ronin brake lever, Ronin 225 front brake lever, right brake lever, front disc brake lever, hand brake lever, brake handle or genuine Ronin lever.

Important fitment distinction: NR3203005D is the standard / non-adjustable matte-black brake lever used with the applicable Ronin Base / Base+ brake setup. It is not the adjustable brake lever. TVS catalogues the adjustable matte-black brake lever separately as NF1503305D.

Product Details

  • Brand: TVS Motor Company
  • Part Number: NR3203005D
  • OEM Description: BRAKE LEVER MAT. BLACK
  • Common Buyer Names: Front brake lever, right brake lever, hand brake lever, brake handle, front disc lever
  • Motorcycle: TVS Ronin 225
  • Position: Front brake / rider's right-hand side
  • Finish: Matte Black
  • Lever Type: Standard / non-adjustable lever for the catalogued Base / Base+ application
  • Quantity: 1 front brake lever
  • Condition: Genuine replacement spare part

Verified Compatibility

Motorcycle / Configuration Fitment Status Verification / Guidance
TVS Ronin 225 – Base Verified The Ronin parts catalogue lists NR3203005D as the matte-black brake lever for the Base brake configuration.
TVS Ronin 225 – Base+ Verified in current Ronin parts catalogue NR3203005D is grouped with the Base / Base+ front master-cylinder setup.
TVS Ronin 225 – Mid / adjustable-lever configuration Not the correct lever The adjustable brake lever is catalogued separately as NF1503305D.
TVS Ronin older SS / DS variants Verify by existing part number / master-cylinder setup TVS specifications identify SS / DS versions as using normal levers, but order NR3203005D only after confirming the exact required part number.
TVS Ronin connected / adjustable-lever versions Do not order by model name alone TVS documentation identifies adjustable levers on applicable connected/higher configurations; these use a different lever arrangement.
TVS Apache RTR 160 Cannot verify to TVS catalogue standard A third-party seller advertises NR3203005D for an Apache RTR 160, but this could not be corroborated against the TVS catalogue evidence used for this listing, so RTR 160 fitment is not claimed.

Standard Lever vs Adjustable Lever – Do Not Confuse the Two

The TVS Ronin has been sold with different lever specifications depending on variant and model configuration. TVS documentation distinguishes between normal/non-adjustable levers and 3-step adjustable levers.

Part Number Description Application in Ronin Catalogue
NR3203005D Brake Lever Matte Black – standard / non-adjustable Base / Base+
NF1503305D Adjustable Control Lever Brake Component – Matte Black Adjustable-lever / higher configuration

If your existing lever has a numbered reach-adjustment cam, do not order NR3203005D solely because your motorcycle is a Ronin 225. Compare the existing lever and confirm the correct TVS part number first.

Associated Front Brake Components

The Ronin front disc-brake parts catalogue places NR3203005D within the front master-cylinder/brake-lever assembly. Related components include:

  • N91151005D: Front master cylinder assembly, matte black – Base / Base+ application
  • NR3203005D: Brake lever, matte black – this listing
  • N9321500: Hand lever bolt / related lever hardware reference in the master-cylinder assembly
  • N9321520: Switch assembly kit reference
  • NF1107405D: Adjustable front master cylinder, matte black – different adjustable setup
  • NF1503305D: Adjustable brake lever component, matte black – different adjustable setup

These related part numbers are provided for identification and comparison only. They are not included with NR3203005D unless physically supplied in the TVS package.

What You Receive

1 × TVS Genuine Front Brake Lever – Matte Black – NR3203005D.

This listing is for the lever component only. The master cylinder, lever holder, pivot bolt, nut, brake-light switch, reservoir, hydraulic hose, caliper and other surrounding brake-system parts are not assumed to be included.

When Should the Brake Lever Be Replaced?

  • Lever is bent following a fall or accident.
  • Lever blade is cracked, broken or deformed.
  • Pivot area is damaged or excessively worn.
  • The lever does not move smoothly because the lever itself is physically damaged.
  • The correct Base / Base+ master-cylinder assembly is serviceable but the brake lever alone requires replacement.

Important Safety & Diagnosis Notes

The front brake is a safety-critical system. A damaged lever should be replaced with the correct part, but a lever replacement alone will not correct hydraulic faults such as air in the brake line, fluid leakage, master-cylinder seal failure, caliper seizure, worn brake pads or a damaged brake hose.

  • Inspect the front brake system for leakage or damage before installation.
  • Confirm that the brake-light switch operates correctly after lever installation.
  • Check lever pivot hardware for wear or damage.
  • Make sure the lever returns freely and does not bind.
  • Never ride the motorcycle until correct front-brake operation has been confirmed.
  • Professional installation is recommended if there is any uncertainty about brake-system condition or assembly.

Why Exact Part-Number Matching Matters

  • Ronin variants do not all use the same front brake lever.
  • Standard and adjustable levers use different TVS part numbers.
  • A visually similar lever from another TVS model does not automatically prove interchangeability.
  • Part-number matching reduces the risk of ordering the wrong pivot geometry or master-cylinder-compatible lever.

Frequently Asked Questions

Q. What is TVS part number NR3203005D?
It is the matte-black standard front brake lever catalogued for the applicable TVS Ronin 225 Base / Base+ front brake setup.

Q. Is NR3203005D an adjustable brake lever?
No. NR3203005D is the standard/non-adjustable matte-black lever. The adjustable Ronin brake lever is catalogued separately as NF1503305D.

Q. Is this the front brake lever or clutch lever?
This is the front brake lever, fitted on the rider's right-hand side. It is not a clutch lever.

Q. Does it fit the Ronin Base?
Yes. The TVS Ronin parts catalogue identifies NR3203005D for the Base front brake configuration.

Q. Does it fit the Ronin Base+?
The current Ronin parts catalogue groups NR3203005D with the Base / Base+ brake setup. Still compare the existing part number where possible, especially after any previous modifications.

Q. Will it fit a Ronin Mid or a bike with adjustable levers?
Do not order NR3203005D if your motorcycle requires the adjustable brake lever. TVS lists the adjustable matte-black lever separately as NF1503305D.

Q. What about older Ronin SS / DS models?
TVS's earlier specification sheet identifies SS / DS versions as using normal levers, while TD used adjustable levers. However, exact NR3203005D fitment should still be confirmed against the existing part or chassis-based catalogue before ordering.

Q. Does NR3203005D fit the Apache RTR 160?
A third-party seller advertises this part for an RTR 160, but sufficient TVS catalogue evidence was not found to confirm that application. Therefore Apache RTR 160 fitment is not claimed in this listing.

Q. Does the lever include the complete master cylinder?
No. NR3203005D is the brake lever component only. The Base / Base+ front master cylinder assembly is a separate component catalogued as N91151005D.

Before You Order

Compare the part number required for your motorcycle with NR3203005D. If your Ronin has a numbered reach-adjuster on the front brake lever, has been modified, or has had its master cylinder replaced previously, verify the exact lever/master-cylinder combination before ordering.

Buyer Search Reference

Common search terms for this spare include TVS Ronin brake lever, Ronin 225 brake lever, Ronin Base brake lever, Ronin Base Plus brake lever, Ronin front brake handle, Ronin right lever, genuine TVS Ronin lever, NR3203005D, NR 3203005D, brake lever matte black and Ronin non adjustable brake lever.

Verify Fitment on Official Brand Portals

For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

Royal Enfield Official Spares Portal

Hero MotoCorp Official eCatalogue

View full details

Become a Dealer Partner

We supply 100% genuine OEM parts to workshops and dealers across India. Our team will reach out within 24 hours.

100% Genuine OEM Parts
Dedicated Account Manager
Next-Day Dispatch
Exclusive Dealer Pricing