TVS Ronin 225 Genuine Right Rider / Front Foot Peg Assembly | NF121390

TVS Ronin 225 Genuine Right Rider / Front Foot Peg Assembly – NF121390

Replace a bent, broken, loose or damaged right-side rider footpeg on the TVS Ronin 225 with the genuine TVS component supplied under part number NF121390. TVS parts catalogues identify NF121390 specifically as RIDER FOOT PEG ASSY R, meaning the right-hand rider / front footpeg assembly.

An official TVS distributor catalogue independently identifies NF121390 as REPOSAPIE DELANTERO DERECHO, or right front footrest, confirming that this is the rider-position peg rather than the passenger/pillion peg.

This is the part buyers commonly search for as a TVS Ronin right rider footrest, Ronin front right footpeg, rider foot peg, right footrest, brake-side footpeg, rider footrest assembly, Ronin RH footpeg or genuine TVS Ronin front footrest.

Product Details

• Brand: TVS Motor Company
• Part Number: NF121390
• OEM Catalogue Description: RIDER FOOT PEG ASSY R
• Official Distributor Description: Right Front Footrest / Reposapié Delantero Derecho
• Customer-Friendly Name: Right Rider / Front Foot Peg Assembly
• Motorcycle: TVS Ronin 225
• Position: Front / rider position
• Side: Right Hand (RH), identified from the rider's seated position facing forward
• Common Side Description: Rear-brake-pedal side
• Function: Rider foot support
• Quantity: 1 right-side rider footpeg assembly
• Condition: Genuine TVS replacement spare part
• HSN Reference: 87141090 in TVS Indian price-list data

Verified Compatibility

Right Side Identification – Please Check Before Ordering

Motorcycle left and right are always identified from the rider's normal seated position while facing forward.

• NF121390: Right rider/front footpeg – this listing
• NF121400: Left rider/front footpeg – separate part
• NF121600: Right pillion/passenger footpeg – separate part
• NF121590: Left pillion/passenger footpeg – separate part

If you are standing in front of the motorcycle and looking toward it, your visual left/right is reversed. Always identify the side from the rider's seated perspective.

Rider Footpeg vs Pillion Footpeg – Do Not Confuse Them

The rider and passenger pegs are not interchangeable. They sit in different positions and work with different support, folding and mounting hardware.

NF121390 vs NF110960 – Footpeg vs Rear Brake Pedal

Both components are located in the right-side rider-control area, which makes them easy to confuse when ordering from a photo.

If a right-side fall bends both the footpeg and brake pedal, the motorcycle may require both components. They are separately catalogued and should be inspected independently.

Right Footrest Support and Mounting Components

The right rider footpeg works as part of a larger footrest/brake-control assembly. TVS catalogues the surrounding support and mounting parts separately.

A hard impact can bend the right footrest support or mounting plate even when the footpeg itself is replaced. Do not force a new NF121390 onto damaged surrounding hardware.

Related Rider-Footpeg Folding Components

TVS separately catalogues the rubber, torsion spring, clamp and pivot hardware used around the rider footpegs.

Important: These surrounding pieces are catalogued separately. Do not assume the rubber, spring, clevis pin, clamp or mounting plate is supplied with NF121390 unless it is physically present in the current genuine TVS package.

Rider Footrest Rubber – Separate Service Part

TVS separately lists NF121410 – RUBBER RIDER FOOTREST. If the metal right rider peg is straight and structurally sound but only the rubber contact surface is worn, damaged or missing, the rubber may be the appropriate service part instead of replacing NF121390.

Conversely, if the metal peg or its pivot area is bent, cracked or heavily worn, replacing only the rubber will not correct the structural problem.

Folding Footpeg Mechanism

The Ronin rider peg is part of a folding system. TVS separately catalogues N9124020 torsion spring and N9200310 clevis pin around the rider footpeg assembly.

The folding arrangement allows the rider peg to move upward under impact rather than acting as a completely rigid projection. After the force is removed, the spring helps the peg return toward its normal riding position.

If the footpeg is not returning correctly, inspect:

• Torsion spring
• Clevis/pivot pin
• Clamp/support
• Mounting plate
• Footpeg body for crash deformation

A failure to return does not automatically mean NF121390 itself is defective.

What You Receive

1 × TVS Genuine Right Rider / Front Foot Peg Assembly – Part No. NF121390.

The following components are not automatically included merely because they appear beside NF121390 in an exploded parts diagram:

• Left rider footpeg
• Right pillion footpeg
• Rear brake pedal
• Rear master cylinder
• Rider-footrest rubber
• Torsion spring
• Clevis/pivot pin
• Rider-footrest clamp
• Right mounting plate
• Right footrest support/component
• Brake-light switch
• Washers, bolts or clips not physically packaged with the peg

When Should NF121390 Be Replaced?

• The right rider footpeg is bent after a fall or collision.
• The metal peg body is cracked or broken.
• The pivot eye or mounting area is structurally damaged.
• The peg has been severely ground down in a slide.
• The footpeg has excessive structural play caused by wear in the peg itself.
• The peg no longer sits at the correct angle because the peg body is deformed.
• An incorrect aftermarket peg has been fitted and the motorcycle is being restored to the original TVS configuration.

Before Ordering – Essential Checks

• Confirm the required TVS part number is NF121390.
• Confirm you need the right rider/front footpeg.
• Do not confuse it with NF121600, the right pillion/rear footpeg.
• Do not confuse it with NF110960, the rear brake pedal.
• Inspect NF121410 if only the rider-footrest rubber is damaged.
• Inspect the torsion spring and clevis pin if the peg does not return correctly.
• Inspect the right mounting plate/support after any hard right-side impact.
• If the motorcycle has aftermarket rearsets, verify the original mounting arrangement before ordering.

Installation Guidance

The rider footpeg is a load-bearing motorcycle control-support component. It carries the rider's body weight and is used while braking, cornering, standing over rough roads and controlling the motorcycle.

• Support the motorcycle securely before beginning work.
• Inspect the right footrest support and mounting plate for bends, cracks or crash damage.
• Inspect the clevis/pivot pin for wear or deformation.
• Inspect the torsion spring for corrosion, breakage or loss of tension.
• Ensure the peg pivots smoothly without excessive lateral movement.
• Confirm the peg returns to the correct normal position after being folded upward.
• Ensure all retaining hardware is fully secured.
• Check that the rider-footrest rubber is properly seated.
• Verify adequate clearance from the rear brake pedal through its full travel.
• Before riding, progressively load the footpeg to confirm the complete support assembly is structurally secure.

Right-Side Crash Inspection

NF121390 is located close to several other right-side controls and components. If the motorcycle has fallen on its right side, inspect the complete area instead of replacing only the visible footpeg.

• NF110960 rear brake pedal
• NF110970 rear master cylinder
• NF121330 right rider-footrest support/component
• NF122190 or NR120170 right mounting plate
• N9124020 torsion spring
• N9200310 pivot/clevis pin
• Rear brake linkage and switch
• Right pillion footrest
• Muffler and exhaust guard
• Frame-side mounting points

A new peg should not be used to mask a bent bracket, mounting plate or frame-side mounting point.

Right Rider Footpeg and Rear Brake Ergonomics

The right rider footpeg establishes the rider's foot position relative to the rear brake pedal. If the peg is bent downward, upward or rearward after an accident, the rider may experience an abnormal relationship between the footrest and brake pedal even if the brake pedal itself is undamaged.

For safe control, the footpeg and brake pedal should both sit in the correct factory relationship after repair.

Ronin Variant / Generation Coverage

The 2025 Ronin catalogue lists NF121390, quantity 1, in the shared ABS 1CH/2CH rider-and-pillion-footrest assembly without a variant-specific remark on the peg itself.

TVS's official parts store lists NF121390 under the Ronin SS–TD family and separately under Ronin Nimbus. This supports use of the same right rider peg across the verified Ronin family.

Some special versions use different surrounding mounting plates, including NR120170 on the applicable 2CH Mid Special configuration, while the rider peg itself remains NF121390.

Standard vs Special Right Mounting Plate

This distinction is important when repairing accident damage: a special-edition mounting plate should not automatically be replaced with the standard plate merely because NF121390 itself is shared.

Historical TVS Price-List Reference

A TVS Indian price list dated May 2024 identifies NF121390 – RIDER FOOT PEG ASSY R with an MRP of ₹283 at that time and HSN 87141090. This historical figure is included only as supporting part-identification evidence. Current MRP can change, so the latest TVS package label or current official price list should be treated as controlling.

Why Exact Part-Number Matching Matters

• Left and right rider pegs use separate TVS part numbers.
• Rider and pillion pegs are different components.
• The rear brake pedal sits beside the RH rider peg but is a completely separate part.
• Rubber, spring, pivot and mounting components can be serviced separately.
• Special variants can use different mounting plates while retaining the same rider peg.
• A generic footpeg may not reproduce the correct pivot geometry, angle, folding travel or rider position.
• Exact part-number matching reduces fitment risk on a load-bearing rider-control component.

Frequently Asked Questions

Q. What is TVS part number NF121390?
NF121390 is the genuine TVS right-hand rider/front footpeg assembly used on the verified TVS Ronin 225 family.

Q. Is NF121390 the right or left rider footpeg?
It is the right-hand (RH) rider footpeg. The left rider footpeg is NF121400.

Q. Is this a passenger footpeg?
No. NF121390 is for the rider/front position. The right passenger/pillion footpeg is NF121600.

Q. Is this the rear brake pedal?
No. The rear brake pedal is NF110960. NF121390 is the foot support beside the brake pedal.

Q. Does NF121390 fit the Ronin SS?
Yes. TVS's official parts store lists NF121390 under the Ronin SS–TD parts family.

Q. Does it fit the Ronin DS?
Yes. The common Ronin ABS 1CH/2CH footrest catalogue retains NF121390 as the right rider peg.

Q. Does it fit the Ronin TD?
Yes. TVS catalogue and official parts-store data support NF121390 across the Ronin SS–TD family.

Q. Does it fit Ronin Nimbus?
Yes. TVS's official parts store separately lists NF121390 under the Ronin Nimbus family.

Q. Does it fit single-channel and dual-channel ABS?
Yes. The 2025 Ronin catalogue lists NF121390 in the shared ABS 1CH/2CH footrest assembly.

Q. Does it include the rider-footrest rubber?
Do not assume so. TVS separately catalogues NF121410 – RUBBER RIDER FOOTREST.

Q. Does it include the folding spring?
The rider-footpeg torsion spring is separately catalogued as N9124020.

Q. Does it include the pivot pin?
The rider-footpeg clevis/pivot pin is separately catalogued as N9200310.

Q. Does it include the right mounting plate?
Do not assume so. The standard right plate is NF122190, while the applicable 2CH Mid Special configuration uses NR120170.

Q. My right footpeg is pointing downward after a fall. Do I need NF121390?
Possibly, but inspect the peg, torsion spring, pivot pin, right support and mounting plate. If the support/plate is bent, replacing the footpeg alone may not restore the correct position.

Q. Can I use NF121400 on the right side?
No automatic interchangeability should be assumed. TVS uses separate part numbers for the RH and LH rider footpegs.

Q. How many footpegs are included?
This listing is for one right-hand rider/front footpeg assembly.

Buyer Search Reference

Common buyer searches include TVS Ronin right footpeg, Ronin 225 rider footrest, Ronin front right footpeg, Ronin brake side footrest, TVS Ronin rider foot peg, Ronin RH footrest, NF121390, NF 121390, Ronin rider peg right, Ronin front footrest, genuine TVS Ronin footpeg and TVS Ronin brake side rider footrest.

Before You Order

Confirm that the required TVS part number is NF121390 and that you need the right-hand rider/front footpeg. If the motorcycle has fallen on the right side, inspect the brake pedal, right support/mounting plate, torsion spring and pivot hardware as well. If the bike has aftermarket rearsets, modified foot controls or a future production revision not covered by the verified catalogue family, confirm fitment through the chassis/VIN-based TVS parts catalogue before installation.