TVS Ronin 225 SS / Base Rear Exhaust Muffler Guard Silver Genuine | NR050110

TVS Ronin 225 Genuine Rear Exhaust / Muffler Guard – Silver – NR050110

Replace a scratched, bent, cracked or damaged rear exhaust guard on the applicable TVS Ronin 225 with the genuine TVS silver guard supplied under part number NR050110. TVS parts catalogues identify NR050110 as GUARD EXHAUST REAR / MUFFLER GUARD REAR, and TVS's official parts store describes the same part as “GUARD EXHAUST REAR (SILVER)”.

This is the part buyers commonly search for as a TVS Ronin silencer guard, Ronin muffler guard, Ronin exhaust heat shield, rear exhaust cover, silencer heat shield, silver silencer cover or genuine Ronin exhaust guard.

Product Details

• Brand: TVS Motor Company
• Part Number: NR050110
• OEM Description: GUARD EXHAUST REAR / MUFFLER GUARD REAR
• Official TVS Parts-Store Description: Guard Exhaust Rear (Silver)
• Common Buyer Names: Silencer guard, muffler guard, exhaust guard, exhaust heat shield, silencer heat shield, rear exhaust cover
• Motorcycle: TVS Ronin 225
• Primary Variant Application: Ronin SS / Base, single-channel ABS
• Position: Rear section of muffler / exhaust assembly
• Finish: Silver
• Quantity: 1 rear exhaust / muffler guard
• Condition: Genuine TVS replacement spare part
• HSN Reference: 87141090 in TVS price-list data

Verified Compatibility

Ronin Variant Mapping – Why It Matters

The original TVS Ronin range was launched in three principal configurations:

• SS: Base / single-channel ABS
• DS: Base+ / single-channel ABS
• TD: Mid / dual-channel ABS

TVS parts catalogues use internal remarks such as 1CH BASE, 1CH BASE+ and 2CH MID rather than always writing SS, DS and TD beside every component. Later catalogue data explicitly maps revised muffler assemblies to SS BASE, DS BASE+ and TD MID, confirming the relationship.

Because the exhaust system differs cosmetically and by variant, the correct guard should be selected by part number and variant, not simply by “Ronin 225.”

Rear Exhaust Guard Comparison

Do not use these part numbers interchangeably based only on visual similarity. Finish, shape, mounting relationship and muffler version can differ between Ronin variants.

Silver Muffler Pairing

TVS's official parts store lists the Ronin Base-version muffler assembly NR050100 as “MUFFLER SUB ASSY (Silver)” and lists NR050110 as “GUARD EXHAUST REAR (SILVER)”. This supports the silver cosmetic pairing used on the applicable Base / SS exhaust configuration.

If the complete silencer/muffler body is damaged, NR050110 alone is not the complete muffler. The exhaust/muffler sub-assembly is a separate, much larger part.

What This Part Does

The rear exhaust guard sits over the outer muffler area and serves both a protective and cosmetic function. It helps shield the outer surface of the silencer area from direct incidental contact while also forming an important visible design element of the Ronin exhaust.

• Provides the correct outer guard for the applicable Ronin Base / SS muffler.
• Helps reduce direct contact with the hotter muffler surface in the guarded area.
• Restores the factory visual appearance after crash, scrape or impact damage.
• Protects the outer muffler area from minor direct contact and abrasion.
• Matches the silver exhaust treatment of the catalogued Base-version system.

Safety note: An exhaust guard reduces direct contact with parts of the exhaust but does not make the exhaust system safe to touch when hot. The guard itself can become hot during and after riding.

What You Receive

1 × TVS Genuine Rear Exhaust / Muffler Guard – Silver – Part No. NR050110.

This listing is for the rear guard itself. The following parts are not assumed to be included unless physically supplied inside the TVS package:

• Complete muffler / silencer assembly
• Front exhaust guard
• Mounting screws
• Punched washers
• Muffler mounting bolt
• Exhaust gasket
• Muffler bracket or chassis hardware
• Oxygen sensor
• Any decorative trim not supplied with NR050110

Related Muffler Assembly Parts

The TVS Ronin muffler catalogue shows NR050110 as one component in a larger assembly. Related parts include:

The related numbers above are provided to help identify what is and is not included. They should not be assumed to be packed with NR050110.

When Should the Exhaust Guard Be Replaced?

• The guard is deeply scratched after a fall or parking incident.
• The silver outer surface is badly damaged and the motorcycle is being restored cosmetically.
• The guard is bent and no longer sits correctly over the muffler.
• Mounting points on the guard are cracked or distorted.
• The guard has suffered impact damage and contacts the muffler incorrectly.
• An incorrect aftermarket guard has been fitted and the owner wants to restore the applicable factory appearance.

Before Ordering – Essential Checks

• Confirm the required TVS part number is NR050110.
• Confirm the motorcycle is the applicable Ronin Base / SS single-channel ABS configuration.
• Check that the existing exhaust system is the corresponding silver/Base-type configuration.
• Compare the mounting-point arrangement with the existing guard if the exhaust has previously been replaced.
• If the bike is a DS / Base+ or TD / Mid variant, do not assume NR050110 is correct.
• For OBD-IIB or later-production Ronin motorcycles, confirm by VIN because TVS introduced revised muffler sub-assemblies.

Installation Guidance

Exhaust components become extremely hot in use. Work on the guard only after the motorcycle has been switched off and the exhaust has cooled completely.

• Park the motorcycle securely on a stable surface.
• Allow the exhaust system to cool fully before touching the muffler or guard.
• Inspect the old guard and mounting hardware before removal.
• Check that the muffler itself is not bent or displaced from an accident.
• Do not force the new guard into position against a deformed muffler.
• Inspect screws and washers and replace damaged mounting hardware as necessary.
• Align the guard properly before final tightening.
• Do not overtighten mounting screws to the point of deforming or stressing the guard.
• After installation, confirm adequate clearance between the guard, muffler and surrounding components.
• Start the motorcycle only after all tools and loose hardware are clear of the exhaust area.

Crash-Damage Inspection

If NR050110 is being replaced after a fall, inspect more than the visible silver guard. A strong impact can also affect:

• Muffler sub-assembly
• Muffler mounting point
• Exhaust gasket joint
• Rear footrest / nearby brackets
• Frame-side exhaust mounting hardware
• Oxygen-sensor wiring on applicable later configurations

A new guard should not be used to conceal a bent or structurally damaged muffler.

Current / OBD-IIB Ronin Caution

Later Ronin parts catalogues introduce revised muffler sub-assemblies, including separate numbers associated with OBD-IIB TD Mid, SS Base, DS Base+ and Special Edition configurations. This shows that TVS has revised the exhaust system across production generations.

Although NR050110 remains documented as the Base rear guard in Ronin catalogues, buyers with a very recent motorcycle should confirm the exact part number through the VIN/chassis-based TVS parts catalogue before ordering. This listing intentionally avoids a blanket “fits all Ronin all years” claim.

NR050110 vs NR050150 – Important Catalogue Note

A later consolidated TVS spare-parts list shows a cross-reference from NR050110 to NR050150. However, TVS's official parts store continues to identify NR050110 specifically as the silver rear guard, while Ronin variant catalogues distinguish NR050110 for 1CH Base and NR050150 for 2CH Mid.

For that reason, this listing does not state that NR050150 is automatically a cosmetic or direct replacement for NR050110 on every motorcycle. If TVS's current VIN lookup supersedes the part on your specific bike, follow the latest chassis-specific parts information. If you specifically need the original silver Base/SS guard, verify the supplied replacement finish before installation.

Why Exact Part-Number Matching Matters

• Ronin SS, DS and TD use different exhaust cosmetic treatments.
• The Base, Base+ and Mid variants have separate catalogue guard references.
• Later OBD-IIB motorcycles introduce revised muffler assemblies.
• A visually similar exhaust guard may not have the same mounting geometry or finish.
• Ordering by exact TVS part number helps avoid cosmetic and fitment mismatches.

Frequently Asked Questions

Q. What is TVS part number NR050110?
NR050110 is the genuine TVS rear exhaust / muffler guard in silver catalogued for the applicable TVS Ronin 225 Base / SS configuration.

Q. Is NR050110 a complete silencer?
No. It is the rear exhaust guard / muffler guard. The Base-version complete muffler sub-assembly is separately catalogued as NR050100.

Q. What colour is NR050110?
TVS's official parts store explicitly describes NR050110 as “GUARD EXHAUST REAR (SILVER)”.

Q. Does it fit the TVS Ronin SS?
Yes, the original Ronin SS is the Base single-channel ABS configuration, and TVS's catalogue lists NR050110 for 1CH BASE.

Q. Does it fit the Ronin DS?
Do not assume so. The Base+ / DS configuration is catalogued with a different rear exhaust guard, NR050010.

Q. Does it fit the Ronin TD?
Do not assume so. The dual-channel ABS Mid / TD configuration is catalogued with NR050150.

Q. Is the front exhaust guard included?
No. The front exhaust guard is a separate component, including NF050380 in the applicable catalogue.

Q. Are mounting screws included?
Do not assume they are included. The TVS muffler catalogue lists mounting screws and washers as separate part numbers. This listing is for NR050110 itself.

Q. Does it fit the latest OBD-IIB Ronin?
Later Ronin catalogues show revised muffler assemblies for OBD-IIB variants. For a recent motorcycle, confirm NR050110 through the VIN/chassis-based TVS parts lookup before ordering.

Q. Is NR050150 a replacement for NR050110?
A consolidated parts list shows an NR050110-to-NR050150 cross-reference, but official Ronin variant catalogues distinguish the two parts by variant and the official parts store calls NR050110 the silver guard. Therefore, automatic interchangeability is not claimed without VIN-based confirmation.

Q. Is this a heat shield?
Yes, buyers commonly refer to this component as the silencer heat shield / muffler heat shield / exhaust cover. TVS's catalogue terminology is “Guard Exhaust Rear.” It reduces direct contact with the muffler surface in the guarded area but can itself become hot.

Q. Can I fit this if my complete muffler is bent?
A bent muffler should be inspected first. The replacement guard should not be forced onto a structurally damaged or misaligned exhaust assembly.

Buyer Search Reference

Common buyer searches include TVS Ronin silencer guard, Ronin 225 exhaust guard, TVS Ronin muffler guard, Ronin silver silencer cover, Ronin exhaust heat shield, Ronin SS silencer guard, Ronin Base muffler guard, NR050110, NR 050110, TVS Ronin rear exhaust cover, Ronin silencer heat shield, genuine Ronin exhaust guard and TVS Ronin silver muffler shield.

Before You Order

For the safest purchase, confirm that your motorcycle requires TVS part number NR050110 and that you need the silver rear exhaust/muffler guard for the Base / SS configuration. If your Ronin is a DS, TD, Special Edition, OBD-IIB or later-production motorcycle—or if the muffler has previously been changed—verify the exact part number through the chassis/VIN-based TVS parts catalogue before ordering.