Uno Minda Headlight Rim Set (Inner + Outer) Black for Royal Enfield Classic 350 UCE – RE-143-HLR-I + RE-143-HLR-O (7" Headlamp Ring/Bezel)

Refresh the front look of your Royal Enfield and stop loose/ill-fitting headlamp rings with this Uno Minda black headlight rim set consisting of Inner Rim (RE-143-HLR-I) + Outer Rim (RE-143-HLR-O). These are the two metal rings that clamp and finish the 7-inch headlamp assembly, restoring OEM-style fitment and preventing rattles, rusted edges, or bent rims caused by minor crashes and repeated headlight removal.

Uno Minda is a major OE-supplier brand in India, so you get consistent stamping, finish, and mounting-hole alignment compared to generic local rims.

Also searched as: headlight rim, headlamp ring, headlight bezel, headlight outer ring, headlight inner ring, 7 inch headlight rim Classic 350.

Before you buy: This part-number set is catalogued for Classic 350; if you have Bullet Standard/Electra/500 or J-Series (Reborn/Meteor/Hunter), you must match your existing rim/holes/clip style by photo before ordering.

Key Features

• Complete kit: Inner + Outer headlamp rim (2 pieces) for a full front refresh

• Black finish for stealth/OE-style look (ideal with black headlamp bowls & guards)

• Designed for 7-inch headlamp assemblies used on Classic 350 UCE platform

• Restores tight headlamp seating; reduces vibration/rattle caused by bent rims

• Better stamping consistency vs many unbranded aftermarket rims (alignment & fit)

• Useful upgrade when swapping lens/reflector, repainting bowls, or restoring old bikes

• Sold by part number: RE-143-HLR-I (Inner) and RE-143-HLR-O (Outer)

Compatibility Table 

Variants

• Full Set (2 pcs): Inner RE-143-HLR-I + Outer RE-143-HLR-O

• Inner Only: RE-143-HLR-I

• Outer Only: RE-143-HLR-O

FAQs 

Q1 (Fitment): How do I confirm this rim set will fit my bike?
A: Confirm your bike is Classic 350 UCE and compare your current rim to the photos: check mounting-hole positions, headlamp size (7 inch), and the way the rim locks/clips.

Q2 (Fitment): Will this fit Bullet Standard or Electra UCE?
A: It may fit some 7-inch Bullet/Electra setups, but these exact part numbers are officially catalogued for Classic 350. For Bullet/Electra, order only if your existing rim matches by photo/holes/clip style.

Q3 (Comparison): Uno Minda vs generic aftermarket headlight rim—what’s the difference?
A: Uno Minda rims typically offer more consistent stamping/alignment and finish durability than many unbranded rims, reducing “hole mismatch” and loose seating issues common with cheap copies.

Q4 (Installation): Any precautions while installing?
A: Protect paint with masking tape, avoid over-bending tabs, and ensure the reflector/lens sits evenly before tightening. If your headlamp has been previously bent, correct the bowl alignment first.

Q5 (Symptoms): What problems does a new rim solve?
A: Bent/rusted rim edges, loose headlamp fitment, headlight vibration/rattle, poor front appearance, and difficulty seating the lens/reflector correctly.

Q6 (Returns-prevention): What should I send to confirm before ordering?
A: Send a clear photo of your current headlamp rim from front + side, and a close-up of the mounting holes/clip points. We’ll match it before dispatch.