VIDA VX2 Front Brake Hose Assembly | Master Cylinder to Caliper | VD4513AACP320S

VIDA VX2 Front Brake Hose Assembly – VD4513AACP320S

Replace a damaged, leaking, swollen, kinked or accident-affected hydraulic brake line with the VIDA Genuine Brake Hose Assembly VD4513AACP320S.

The official VIDA / Hero e-Parts Catalogue description is BRAKE HOSE ASSY FR MASTER CYLINDER TO CALIPER. In buyer and workshop terminology, this is the front hydraulic brake hose / brake line connecting the brake master cylinder to the brake caliper on the confirmed VIDA VX2 applications listed below.

This product is commonly searched as VIDA VX2 front brake hose, VX2 brake pipe, VX2 hydraulic brake line, VX2 master cylinder hose, VX2 caliper hose, VIDA VX2 Plus brake hose and VD4513AACP320S.

1. Product Identification

• Brand: VIDA / Hero MotoCorp
• Retail / search SKU: VD4513AACP320S
• Catalogue component number: VD4513A-ACP-320
• Official description: BRAKE HOSE ASSY FR MASTER CYLINDER TO CALIPER
• Common name: Front brake hose / hydraulic brake line
• System: Front hydraulic braking system
• Connection: Master cylinder to brake caliper
• MOQ: 1
• Catalogue MRP: ₹672
• Catalogue status: Regular

2. Confirmed Catalogue Compatibility

Important: The above model names are reproduced from the official VIDA / Hero e-Parts Catalogue applicability screen for this exact component. VIDA VX2 variants can use different braking hardware, so do not assume that every VX2 or every VX2 Go variant uses this hydraulic hose merely because the model name is similar.

3. Critical Fitment Note – Confirm the Exact Brake System

Before ordering, verify that your scooter uses the exact VD4513A-ACP-320 / VD4513AACP320S brake hose and has the matching master-cylinder-to-caliper hydraulic arrangement.

Confirm:

• Exact part number from the VIDA / Hero EPC or VIN lookup
• Exact VX2 model and variant
• Production / catalogue generation
• Front brake configuration
• Master-cylinder outlet orientation
• Caliper connection orientation
• Brake-hose length and routing
• Mounting clips / guides
• Banjo fitting angles and bolt specification

Do not order a brake hose only by matching photographs. Two hoses can look similar but differ in length, banjo angle, fitting orientation or routing.

4. What This Brake Hose Does

The front brake hose carries hydraulic brake pressure from the handlebar-mounted master cylinder to the front brake caliper. When the brake lever is operated, hydraulic pressure is transmitted through this hose to move the caliper piston and apply the brake.

Because the hose is pressure-bearing, its internal structure and end fittings are safety-critical. A hose that is damaged, leaking, kinked, incorrectly routed or internally deteriorated should not be reused.

5. When Replacement May Be Required

• Brake fluid leakage from the hose or crimped ends
• Outer hose cracking, abrasion or cuts
• Hose swelling under brake pressure
• Kinked or crushed hose after accident repair
• Damaged banjo / end fittings
• Corrosion around hose-end fittings
• Incorrect routing or previous modification
• Brake hose damaged during caliper, fork or front-end repair

6. Symptoms That Need Brake-System Diagnosis

• Spongy front brake lever
• Front brake lever travels unusually far
• Brake fluid visible around hose fittings
• Brake pressure drops while holding the lever
• Front brake performance is inconsistent

These symptoms do not automatically mean the hose is faulty. Air in the hydraulic system, worn pads, caliper problems, master-cylinder faults, contaminated brake fluid or leaking seals can cause similar symptoms. Proper diagnosis is required.

7. Key Features

• VIDA / Hero Genuine replacement brake hose
• Correct master-cylinder-to-caliper hydraulic line for confirmed applications
• Model-specific hose length and fitting geometry
• Designed for factory brake-line routing
• Suitable for accident repair and hydraulic brake-system restoration
• Exact replacement where VD4513AACP320S is specified
• Safer fitment choice than visually similar universal brake hoses

8. What You Will Receive

• 1 x VIDA Genuine front brake hose assembly
• Part number: VD4513AACP320S
• Catalogue reference: VD4513A-ACP-320

9. Not Included Unless Physically Supplied

• Front brake master cylinder
• Front brake caliper
• Brake pads
• Banjo bolts
• Copper / sealing washers
• Brake-fluid reservoir components
• Brake fluid
• Mounting clips, brackets or guides
• Workshop labour

10. Technical Details

11. Installation & Safety Note

This is a safety-critical brake component. Installation should be carried out by a qualified technician familiar with hydraulic braking systems.

During installation:

• Route the hose exactly as intended by the manufacturer
• Do not twist, kink or stretch the hose
• Ensure the hose does not contact the tyre, wheel, suspension or sharp body edges
• Inspect banjo bolts and sealing washers
• Use the brake-fluid grade specified for the exact vehicle
• Bleed the hydraulic system completely
• Check every connection for brake-fluid leakage
• Confirm a firm and consistent brake lever before riding
• Turn the handlebar fully left and right and confirm the hose is not stretched or trapped

Do not ride the scooter if the brake lever feels spongy, pressure drops, the hose leaks, or the front brake does not operate consistently.

12. Brake Fluid Note

VIDA technical documentation specifies DOT 3 or DOT 4 brake fluid for hydraulic-brake VX2 applications. Always follow the exact model's owner/service manual and never mix incompatible or contaminated brake fluid.

13. Return-Prevention / Parts Policy

Please confirm the exact SKU and fitment before opening or installing this brake hose.

A correctly supplied brake component that has been installed, filled with brake fluid, contaminated, bent, modified or used cannot be treated as an unused return. Record a clear continuous unboxing video before opening the sealed package. Wrong-item or transit-damage claims should be reported within 24 hours with the unboxing video and clear photographs.

14. Buyer-Focused FAQs

Q1. What is VD4513AACP320S?
It is the VIDA Genuine brake hose assembly connecting the front brake master cylinder to the brake caliper on confirmed VIDA VX2 applications.

Q2. What is the official component number?
VD4513A-ACP-320.

Q3. Is this the front brake hose?
Yes. The factory description specifically states master cylinder to caliper.

Q4. Does it fit VIDA VX2?
Yes. VIDA VX2 February 2025 is listed as an applicable model in the official e-Parts Catalogue.

Q5. Does it fit VIDA VX2 GO FB?
Yes. VIDA VX2 GO FB August 2026 is an exact catalogue application.

Q6. Does it fit VIDA VX2 Go 2.2 RQ / Plus 4.4 RQ?
That combined August 2026 application entry is shown in the official catalogue for this part. Because VX2 variants can use different brake hardware, confirm the exact VIN/EPC part number before installation.

Q7. Does it fit every VIDA VX2 Go variant?
Do not assume so. Buy only when the exact part number or VIN/EPC lookup confirms VD4513AACP320S.

Q8. Are banjo bolts and copper washers included?
Do not assume so. Only components physically supplied inside the sealed package are included.

Q9. Does brake fluid come with the hose?
No.

Q10. Can I install it without bleeding the brake?
No. Opening a hydraulic brake line introduces air, so the system must be correctly refilled/bleeded and tested before riding.

Q11. What is the MRP?
₹672 as shown in the official VIDA / Hero e-Parts Catalogue.

15. Search Keywords

VIDA VX2 front brake hose, VIDA VX2 brake pipe, VX2 hydraulic brake line, VX2 master cylinder to caliper hose, VIDA VX2 Plus brake hose, VX2 GO FB brake hose, VIDA VX2 brake line genuine, VD4513AACP320S, VD4513A-ACP-320.