Skip to product information
1 of 7

TVS Motor Company

TVS Genuine Chain & Sprocket Kit for Ronin 225 – NF321270 | OEM Final Drive Set

TVS Genuine Chain & Sprocket Kit for Ronin 225 – NF321270 | OEM Final Drive Set

Regular price Rs. 2,768.00
Regular price Rs. 2,825.00 Sale price Rs. 2,768.00
Sale Sold out
Shipping calculated at checkout.
Non-cancellable Non-returnable

Please confirm the part number and compatibility before ordering.

Important — Please verify before ordering Confirm the part number, model and compatibility before purchase. Orders are subject to our cancellation and return policy. A continuous unboxing video is required for shortage, incorrect-item and damage claims. Read full Return, Cancellation & Warranty Policy

TVS Genuine NF321270 Chain & Sprocket Kit – Ronin 225

Renew the worn final-drive components on your TVS Ronin 225 with the TVS Genuine Chain & Sprocket Kit, part number NF321270. This is the motorcycle's rear-wheel drive-chain and sprocket service kit—not a cam/timing-chain kit, not a chain-only pack and not an aftermarket Rolon-branded kit.

Replacing the drive chain and both sprockets as a matched service set helps avoid putting a new chain on worn sprocket teeth. The correct replacement maintains the intended chain drive arrangement; it is not a horsepower upgrade or a cure for every drivetrain noise.

BEFORE ORDERING: Match NF321270 against your TVS parts catalogue or existing kit, particularly if your Ronin has revised gearing, a modified sprocket, or a different chain length. Chain-link count is disputed in available TVS catalogue material; see the technical check below.

Product identification

Detail Product information
Brand TVS Motor Company – TVS Genuine Spare Part
Part number / SKU NF321270 (also searched as NF 321270)
TVS catalogue name CHAIN AND SPROCKET KIT / KIT CHAIN & SPROCKET
Main application TVS Ronin 225 (225.9 cc) in parts-catalogue-covered configurations
System Final drive / rear-wheel drive chain and sprockets
Kit quantity One matched kit for one motorcycle
Expected factory gearing reference 13T front / 42T rear in documented standard Ronin fitments. Confirm the received kit and vehicle.
Chain link count Check the packet before listing an exact link count – see catalogue discrepancy below.
Retail branding TVS Genuine, not Rolon-branded aftermarket
Manufacturer packet / MRP Verify label and current MRP on the actual physical stock
Price / inventory / weight Not stated until verified

What is included

The TVS kit listing and the Ronin kit-contents table identify these three drive components:

Component What it does Included quantity
Drive chain Connects engine drive sprocket to rear wheel sprocket 1
Front / engine sprocket Transfers gearbox output to drive chain 1
Rear wheel sprocket Transmits chain drive to rear wheel 1

Not confirmed as part of the retail kit: front-sprocket lock plate or retaining screws, rear sprocket nuts/bolts, axle, rear-wheel bearings, chain slider/guide, chain lubricant or cleaner, tools, and other workshop hardware. These are separately catalogued items; do not assume they are supplied without checking the sealed kit contents.

Kit quantity: one saleable NF321270 kit contains a service set for one motorcycle, not several kits. The drive chain and both sprockets should be checked against the physical package before dispatch.

Confirmed motorcycle fitment and limitations

TVS motorcycle Fitment assessment / check
TVS Ronin 225 – manufacturer parts-catalogue-covered single-channel ABS Yes, for the matching NF321270 drive configuration. Match OE part number and final-drive hardware.
TVS Ronin 225 – manufacturer parts-catalogue-covered dual-channel ABS Yes, for the matching NF321270 drive configuration. ABS channel count alone does not establish every later revision.
TVS Ronin 225 ABS MID / Base Exact NF321270 reference is documented in model-specific parts catalogues.
TVS Ronin SS-TD / Nimbus – documented Indonesian configurations Official TVS overseas parts store lists the same OEM part number; confirm local motorcycle variant.
TVS Ronin – newer / modified / imported specification Check the VIN, updated parts catalogue, fitted sprocket sizes, chain length and rear hub pattern first.
TVS Apache RTR 160 4V / RTR 200 4V Not established. These bikes use separately numbered chain/sprocket kits; not a substitute by appearance.
TVS Raider, NTORQ, Jupiter, other TVS models Not established. Do not select NF321270 by brand alone.

A matching model name does not resolve a changed engine sprocket, altered final-drive ratio, custom chain or replacement rear wheel. For a modified motorcycle, compare the removed sprockets and chain and ask your mechanic to verify before ordering.

Chain length and gearing: important verification

Rear sprocket: Ronin parts references identify the original rear sprocket as 42 teeth (separate rear sprocket reference NF111220). The documented standard Ronin reduction and reputable dedicated Ronin kit references support 13T front / 42T rear. Confirm your bike has its standard gearing.

Why there are two link counts in circulation: One Ronin kit contents table specifies a 114-link chain for NF321270, while a diagram in the same Ronin parts-catalogue family lists NF111520 – CHAIN ASSY 116 SEALING RING as a separate chain part. These are not identical statements. Therefore, the exact chain supplied in a newly packed NF321270 kit should be confirmed from the retail label or direct inspection instead of promising that every NF321270 box has 114 or 116 links.

Do not assume a 116-link stand-alone chain reference means the complete NF321270 kit contains a 116-link chain. Also do not assume a 114-link aftermarket kit proves the contents of every TVS Genuine kit revision. Chain pitch, sealed-ring construction, sprocket tooth count, chain joining method and rear sprocket mounting must be verified against the physical kit if any of these details is material to your vehicle.

If the original bike has been converted to a 14-tooth front sprocket or other modified gearing, this is not an advertised performance-conversion kit.

Compare related TVS chain and sprocket part numbers

Part number Intended product / distinction Can it replace NF321270?
NF321270 TVS Genuine Ronin 225 chain & sprocket kit This product
NF321280 TVS Apache RTR 160 4V kit, catalogue description 13T / 45T / 136 links No automatic interchangeability
N9326260 TVS Apache RTR 160 4V kit, catalogue description 13T / 44T / 138 links No automatic interchangeability
NF321540 Another separately numbered TVS chain/sprocket kit No automatic interchangeability
NF111520 Separately listed Ronin chain assembly (catalogue calls it 116 sealing ring) Not the same as a three-component service kit
N9081830 Separately catalogued rubberised engine sprocket Component reference, not a kit
NF111220 Separately catalogued Ronin rear sprocket, 42 teeth Component reference, not a kit

A model-specific front sprocket may differ in spline dimensions, offset or rubber damping; rear sprockets can differ in mounting pattern and chain compatibility even where tooth counts look similar. Always select by exact OEM reference and assembly configuration.

TVS Genuine vs Rolon aftermarket – choose the correct product

This listing is for TVS Genuine NF321270. Under The Hood also offers a separate Rolon HPOR F418 NF Noise-Free Chain & Sprocket Kit for TVS Ronin 225. The Rolon kit is a separately branded aftermarket option, with its own advertised specifications, supply and packaging.

The Rolon option must not be described as the contents or manufacturer of NF321270 without physical evidence. If you are trying to restore the original TVS reference, select NF321270. If you want to compare a Rolon-branded alternative, follow the separate listing and compare the actual kit labels.

When should the chain and sprockets be replaced?

The chain and sprockets work together. Inspect the system if there is persistent excessive chain slack, binding or tight spots, a damaged or stiff link, hooked or uneven sprocket teeth, unusual drive vibration, or a chain that cannot be correctly adjusted. A squeak or chain noise alone does not prove that the entire kit must be replaced: check chain lubrication, alignment, chain slider, sprocket bearings, fastener condition and adjustment first.

  • The chain has excessive wear, irregular elongation, tight or seized links, missing/damaged sealing elements, or visible corrosion.
  • Sprocket teeth have become sharp, hooked, chipped, uneven or asymmetrically worn.
  • The same chain repeatedly needs adjustment or has noticeably inconsistent slack around its rotation.
  • The bike has a damaged or incorrect front sprocket or rear sprocket from a previous nonstandard conversion.
  • A qualified mechanic confirms that chain and sprockets are sufficiently worn to replace together.

TVS recommends inspecting all three drivetrain components and replacing the engine sprocket, rear sprocket and chain together where worn. Proper adjustment, lubrication and rear-wheel alignment are essential even with a brand-new kit.

Installation and safety checklist

  1. Before dismantling, verify NF321270, the original front and rear sprocket specifications and the chain configuration for your vehicle.
  2. Support the motorcycle securely with the engine switched off and transmission in neutral. Never run the engine to rotate the chain during service.
  3. Inspect the old drive arrangement, including sprocket offset, front spline profile, rear sprocket mounting, chain guide and chain guard. Document any modifications.
  4. Inspect sprocket fasteners, front lock plate, rear cush-drive condition, rear wheel bearings, chain adjusters and chain slider. Replace damaged or single-use retainers as specified in the workshop manual; do not assume they are in this kit.
  5. Fit all drive components in their correct orientation and use the relevant TVS service manual for tightening sequence, locking hardware, torque values and the chain joining method.
  6. Adjust chain slack and check rear-wheel alignment in the exact checking condition specified by the owner's manual, then recheck at multiple wheel positions.
  7. Turn the wheel by hand to check smooth movement and correct clearance from the tyre, swingarm, chain guard and other components.
  8. Lubricate correctly, inspect for loose fasteners or chain contact, and conduct a controlled road test. Recheck chain adjustment after initial running as required by the workshop manual.

Manufacturer service reference: In the checked TVS Ronin owner's manual the chain slack is stated as 20–25 mm, with the motorcycle on the centre stand in neutral for inspection. This is a service reference for the manual-covered bike, not a licence to ignore a later manual or modified suspension. TVS also recommends chain cleaning and lubrication as frequently as every 500 km. Follow your motorcycle's applicable manual and never overtighten the chain.

Professional fitting recommended. A chain fitted too tightly or too loosely, an insecure master link, a misaligned rear wheel or incorrectly retained sprockets can damage the motorcycle and create a serious riding hazard.

Before buying – the right way to verify

  • Check that your motorcycle's OEM parts catalogue or existing packet specifies NF321270.
  • Confirm the motorcycle is a TVS Ronin 225 and note its model year, market specification, VIN and any sprocket modifications.
  • If chain length is decisive, ask for a photo of the exact stocked kit label because both 114 and 116 appear in catalogue material.
  • Compare rear sprocket mounting-hole pattern, front sprocket spline/profile, tooth counts, chain pitch and any included joining hardware.
  • This is a complete final-drive kit, not an engine timing-chain set, and not a bare chain or only one sprocket.
  • Confirm current genuine TVS packaging, packed components, MRP and manufacturing details before dispatch.

Frequently asked questions

1. What is TVS NF321270?
It is the TVS Genuine chain and sprocket kit for the Ronin 225 final-drive system, including a drive chain and front/rear sprockets.
2. Is NF321270 for the TVS Ronin 225?
Yes. The exact part number appears in Ronin 225 parts catalogues and TVS's official overseas parts store. Check your model revision and existing gearing.
3. Is it compatible with single-channel ABS Ronin?
It is documented for Ronin configurations including single-channel ABS where NF321270 is the specified drive kit. Confirm your VIN/parts catalogue.
4. Does it fit the dual-channel ABS Ronin?
The part is documented in Ronin ABS variants, but confirm the exact parts catalogue for the production version; ABS channel count does not guarantee unchanged final-drive hardware.
5. Will it fit a 2025 or 2026 Ronin?
Do not assume by year alone. Verify NF321270 against the latest TVS catalogue or the existing installed kit, especially for revisions or modified bikes.
6. Does the kit include both sprockets?
The manufacturer's kit list identifies an engine/front sprocket, a rear sprocket and a drive chain. Extra retention hardware is not confirmed.
7. Is there a rear sprocket in the kit?
Yes, the manufacturer's kit-contents description includes a rear sprocket, listed as 42 teeth in the checked Ronin kit list.
8. How many teeth does the front sprocket have?
Documented standard Ronin gearing uses 13 teeth at the front. Confirm tooth count on the actual kit and vehicle before ordering.
9. How many teeth are on the rear sprocket?
The manufacturer's Ronin kit list identifies a 42-tooth rear sprocket for this documented configuration.
10. Is the chain 114 links or 116 links?
The available TVS parts references are inconsistent: the NF321270 kit list says 114, while a separately catalogued Ronin chain, NF111520, is labelled 116. Verify the actual NF321270 pack before relying on either count.
11. Is this an O-ring or X-ring chain?
A separate Ronin chain reference includes the words “sealing ring”, but that does not prove the exact ring type or supplied chain specification in every NF321270 kit revision. Check the retail packet.
12. What chain pitch does this kit use?
The checked exact-SKU sources do not establish a reliable pitch specification for every production revision. Confirm the packet or TVS workshop reference before specifying a 428/520/etc. size.
13. Is this the same as a Rolon F418 NF kit?
No. NF321270 is a TVS Genuine kit SKU. Rolon HPOR F418 NF is a separately branded Ronin chain kit, offered as a different product.
14. Does NF321270 fit Apache RTR 160 4V?
No interchangeable application was verified. Apache 160 4V has other kit numbers, including NF321280 and N9326260, with different listed gearing.
15. Is NF321280 the same as NF321270?
No. NF321280 is catalogued as an Apache RTR 160 4V kit, not the Ronin 225 NF321270 kit.
16. What is N9326260?
It is a different TVS kit reference used on specified Apache RTR 160 4V configurations; do not substitute it for the Ronin kit.
17. Can I replace just the chain and keep the old sprockets?
A chain fitted to worn sprocket teeth may wear prematurely. TVS recommends inspecting the chain and both sprockets and replacing worn drive components together.
18. Will this kit reduce chain noise?
It can address noise caused by worn final-drive parts, but not noise from poor adjustment, a worn chain guide, an engine or wheel bearing issue, or another source. Diagnose first.
19. Will it increase top speed or horsepower?
It is an original-type replacement kit, not a performance tuning or gearing-conversion product.
20. Can I use it after changing to a 14-tooth front sprocket?
Do not assume so. A modified final-drive ratio can require a different combination of chain length, sprocket dimensions and alignment. Verify with your mechanic.
21. How many kits do I get?
One TVS NF321270 chain-and-sprocket kit for one motorcycle.
22. Are the rear sprocket bolts included?
Not confirmed. TVS lists many retaining fasteners separately; assume only the chain and two sprockets until the packet is checked.
23. Is the front sprocket lock plate included?
Not confirmed. A lock plate is separately catalogued. Ask for a contents check if you need new retention hardware.
24. Is chain lube included?
Chain cleaner and lubricant are not confirmed as part of the NF321270 kit and should be purchased separately.
25. What chain slack should my Ronin have?
The checked TVS Ronin owner's manual gives 20–25 mm in its checking method. Follow the applicable manual for your exact version.
26. How often should I lubricate the chain?
TVS's Ronin owner's manual recommends cleaning and lubrication as frequently as every 500 km, particularly important in dusty or wet conditions.
27. Does a worn chain always mean the whole kit is bad?
Not automatically, but chain and sprockets wear as a system. A competent mechanic should examine all three components, alignment and chain guide.
28. Can I install it myself?
Only if you have appropriate equipment and the correct TVS workshop procedure. Drive-chain retention, torque and alignment are safety critical.
29. Is this a genuine TVS product or a third-party copy?
This listing is for TVS Genuine NF321270. Confirm TVS-branded genuine packaging and the exact part number before fitting.
30. How do I confirm it fits before ordering?
Share the motorcycle year, model/ABS variant, VIN or current kit label, plus photos of existing sprockets if modified. Select the exact part number.
31. Does this replace the engine timing chain?
No. It is the external final-drive chain and sprockets used to drive the rear wheel; the engine cam/timing chain is a different system.

Find the right service item: TVS Ronin 225 OEM drive-chain kit, Ronin 225 original chain sprocket set, NF321270, NF 321270, Ronin front 13T rear 42T sprockets, genuine TVS chain kit, chain and sprocket replacement kit for Ronin single-channel / dual-channel ABS.

Verify Fitment on Official Brand Portals

For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

Royal Enfield Official Spares Portal

Hero MotoCorp Official eCatalogue

View full details

Become a Dealer Partner

We supply 100% genuine OEM parts to workshops and dealers across India. Our team will reach out within 24 hours.

100% Genuine OEM Parts
Dedicated Account Manager
Next-Day Dispatch
Exclusive Dealer Pricing